Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › TOYOTA PARKING ASSIST-SENSOR SYSTEM › from 2015.08
RM2660E _56 Audio / Visual / Telematics _052831 PARK ASSIST / MONITORING _0255497 TOYOTA PARKING ASSIST-SENSOR SYSTEM D

PARK ASSIST / MONITORING  TOYOTA PARKING ASSIST-SENSOR SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZE TOYOTA PARKING ASSIST-SENSOR SYSTEM


HINT:

The following items can be customized.


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



a.

Connect the GTS to the DLC3.


b.

Turn the engine switch on (IG).


c.

Turn the GTS on.


d.

Enter the following menus: Customize Setting.


e.

Select the setting by referring to the table below.

Warning
Display Default Contents Setting Relevant ECU
Rr Sensor Onset Range Wide Sets the buzzer activation range for the rear sensors. Narrow or Wide Clearance Warning ECU Assembly
Keep Sense Buzzer Avail Makes the buzzer sound when the distance between the vehicle and obstacle does not change for more than 3 seconds. Not Avail or Avail Clearance Warning ECU Assembly
Fr & Rr Buzzer Volume H Changes the buzzer volume setting. L, M1, M2, M3 or H Clearance Warning ECU Assembly
Temporary Mute Reset Speed Adjust 20 km/h Sets the vehicle speed at which the temporary mute function resets. System Link, 15km/h, 20km/h, 30km/h Clearance Warning ECU Assembly
Temporary Mute Function ON Sets the availability of the temporary mute function. OFF, ON Clearance Warning ECU Assembly

Sensor
Display Default Contents Setting Relevant ECU
Sensor Condition N Avail Makes the sensors available when the shift lever is in N. Not Avail or Avail Clearance Warning ECU Assembly
Reverse Range Front Sensor F Changes the operation setting for the vehicle front sensors when the shift lever is in R. F, Fcrn or F Stop Clearance Warning ECU Assembly
Non P/R Range Rear Sensor R Stop Changes the operation setting for the vehicle rear sensors when the shift lever is not in P or R. R, Rcrn or R Stop Clearance Warning ECU Assembly

Display
Display Default Contents Setting Relevant ECU
Display Mode All The display mode setting (when the TOYOTA parking assist-sensor system is normal). All or Undisp Clearance Warning ECU Assembly



CUSTOMIZING FUNCTION WITH MULTI-DISPLAY


HINT:

The following items can be customized.


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



a.

Turn the engine switch on (IG).


b.

Enter the following menus: Setup / Vehicle / TOYOTA parking assist.


c.

Select the setting by referring to the table below.

Display Default Contents Setting
Alert volume 3 Sets the buzzer activation range for the rear center sensors. 1, 2, 3, 4 or 5
Display Indicator of Display Off not illuminated*3 or indicator of Display Off illuminated*4 The display mode setting (when the TOYOTA parking assist-sensor system is normal). On or Off
Distance Front Green*2 Sets the detection operation range for the front center sensors. Orange*1 or Green*2
Distance Rear Green*2 Sets the detection operation range for the rear center sensors. Orange*1 or Green*2

*1: Detection range of 600 mm (23.6 in.)

*2: Detection range of 1000 mm (39.4 in.)

*3: Sonar indication is available on the multi-display

*4: Sonar indication is not available on the multi-display