When the clearance warning ECU self-diagnosis determines that the CAN communication system is malfunctioning, this DTC is stored.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| U0100 | Lost communication with ECM. | CAN communication system |
| U0101 | Lost communication with TCM. | CAN communication system |
| U0142 | Lost communication with main body ECU (multiplex network body ECU). | CAN communication system |
| U0155 | Lost communication with the Instrument Panel Cluster (IPC) control module. | CAN communication system |
When 2 or more DTCs starting with "U" are output simultaneously, inspect the connectors and wire harness of each ECU.
Clear the DTCs (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>TOYOTA PARKING ASSIST-SENSOR SYSTEM>DTC CHECK / CLEAR).
Check for DTCs (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>TOYOTA PARKING ASSIST-SENSOR SYSTEM>DTC CHECK / CLEAR).
| Result | Proceed to |
|---|---|
| DTC U0100, U0101, U0142 and U0155 are not output. | A |
| DTC U0100, U0101, U0142 or U0155 are output (for LHD). | B |
| DTC U0100, U0101, U0142 or U0155 are output (for RHD). | C |
A
(See pageGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING)
B
C