Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › REAR VIEW MONITOR SYSTEM › from 2015.08
RM2660E _56 Audio / Visual / Telematics _052831 PARK ASSIST / MONITORING _0255505 REAR VIEW MONITOR SYSTEM U

PARK ASSIST / MONITORING  REAR VIEW MONITOR SYSTEM  TERMINALS OF ECU  


CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY


a.

Disconnect the F120 and F124 radio and display receiver assembly connectors.

U166588E03
1.094,0.844 1.448,1.042 0.354,0.198 10 false F118 0.896,2.677 1.26,2.875 0.365,0.198 10 false F120 5.781,1.906 5.99,2.146 0.208,0.24 10 false A 6.302,1.323 6.646,1.563 0.344,0.24 10 false RA 1.823,2.688 2.177,2.885 0.354,0.198 10 false F122 4.865,0.833 5.24,1.031 0.375,0.198 10 false F124


b.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
F120-3 (ACC1) - Body ground BE - Body ground Power source Engine switch on (ACC) 11 to 14 V
Engine switch off Below 1 V
F120-4 (+B1) - Body ground V - Body ground Power source Always 11 to 14 V
F120-7 (GND1) - Body ground W-B - Body ground Ground Always Below 1 Ω
F124-1 (IG) - Body ground B - Body ground Power source Engine switch on (IG) 11 to 14 V
Engine switch off Below 1 V


c.

Reconnect the F120 and F124 radio and display receiver assembly connectors.


d.

Measure the waveform according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
F118-11 (CA+) - F118-23 (CGND) B - Shielded Power source Engine switch on (ACC) 5.5 to 7.05 V
F118-12 (V+) - F118-24 (V-) R - W Display signal Engine switch on (IG), shift lever in R Pulse generation (See waveform 1)
Engine switch on (IG), shift lever in R, screen blacked out by covering camera lens Pulse generation (See waveform 2)
F124-2 (REV) - Body ground L - Body ground Reverse signal Engine switch on (IG), shift lever in R 7.5 to 14 V
Engine switch on (IG), shift lever not in R Below 1 V


e.
E159949E01
0.196,1.018 0.531,1.161 0.335,0.144 10 GND

Using an oscilloscope, check waveform 1.

Waveform
Item Content
Terminal No. (Symbol) F118-12 (V+) - F118-24 (V-)
Tool Setting 0.2 V/DIV., 50 μs/DIV.
Condition Engine switch on (IG), shift lever in R


f.
E164781E01
0.275,1.002 0.612,1.146 0.336,0.144 10 GND

Using an oscilloscope, check waveform 2.

Waveform
Item Content
Terminal No. (Symbol) F118-12 (V+) - F118-24 (V-)
Tool Setting 0.2 V/DIV., 50 μs/DIV.
Condition Engine switch on (IG), shift lever in R and camera lens is covered, blacking out the screen