Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › PARKING ASSIST MONITOR SYSTEM(w/o Side Monitor System) › 2014.08–2015.08
RM2660E _56 Audio / Visual / Telematics _052831 PARK ASSIST / MONITORING _0255506 PARKING ASSIST MONITOR SYSTEM(w/o Side Monitor System) D

PARK ASSIST / MONITORING  PARKING ASSIST MONITOR SYSTEM(w/o Side Monitor System)  DIAGNOSIS SYSTEM  


PARKING ASSIST MONITOR DIAGNOSIS SYSTEM


a.

For parking assist monitor system (w/o Side Monitor System) diagnosis, signals received by the multi-media module receiver assembly can be checked and the parking assist monitor system (w/o Side Monitor System) can be calibrated, adjusted and checked using the multi-media module receiver assembly.

NOTICE:

Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the parking assist monitor system (w/o Side Monitor System) may be needed (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>PARKING ASSIST MONITOR SYSTEM(w/o Side Monitor System)>CALIBRATION).


HINT:

The displayed items may differ depending on vehicle specifications.




DIAGNOSIS SCREEN TRANSITION (during parking assist ECU initialization)


E349811E01
0.156,0.115 1.01,0.51 0.854,0.396 12 false Example: 2.969,1 5.063,1.552 2.094,0.552 10 false Start the diagnostic mode referring to the navigation system.

E226187


DIAGNOSIS SCREEN TRANSITION (after parking assist ECU initialization)


E349812E01
0.094,0.073 1.563,0.313 1.469,0.24 12 false Example: 2.948,0.833 5.094,1.427 2.146,0.594 10 false Start the diagnostic mode referring to the navigation system.

E226189


VEHICLE SIGNAL CHECK



b.
E226190

Select "Function Check/Setting" on the [Service Menu] screen to display the [Function Check/Setting] screen.


c.
E226193

Select "Vehicle Signal" on the [Function Check/Setting] screen.


d.
E225776

Vehicle Signal Check Mode:

i.

When the [Vehicle Signal Check Mode] screen is displayed, check "REV" the vehicle signal conditions.

HINT:
·

Only conditions having inputs are displayed.

·

This screen displays vehicle signals input to the multi-media module receiver assembly.

·

For details of this function, refer to Diagnosis Display Detailed Description in System Description (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>PARKING ASSIST MONITOR SYSTEM(w/o Side Monitor System)>SYSTEM DESCRIPTION)







CAR SIGNAL CHECK (parking assist ECU input signals)


a.

Start diagnostic mode (See page Audio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>DTC CHECK / CLEAR).

i.
E226190

Select "Function Check/Setting" on the [Service Menu] screen to display the [Function Check/Setting] screen.


ii.
E226193

Select "Camera Setting" on the [Function Check/Setting] screen.


iii.
E252020

Select "Next" on the [Car Information Check] screen.

HINT:

After "Next" is selected, the screen transitions differ depending on whether initialization of the parking assist monitor system (w/o Side Monitor System) was performed after the multi-media module receiver assembly was replaced.

Parking Assist ECU Initialization Screen Transition
Not performed [Car Signal Check] screen
Performed [Mode Setting] screen



iv.
E233966

When the screen changes to the [Mode Setting] screen, select "Back Camera Setting" to display the [Car Signal Check] screen.

HINT:

To select a grayed out item, select and hold the item for 2 seconds or more.




b.
E233967

Car Signal Check:

i.

On the [Car Signal Check] screen, it is possible to inspect the state of signals and check the settings.

Item Inspection Detail Note
BCTY Back door courtesy light switch signal input When "CHK" (red) is displayed, selecting "Next" will not change to the next screen.

HINT:
·

When "CHK" (red) is displayed, perform inspections based on the result of the following inspections.

·

If performing the adjustment after proceeding to the next screen, confirm that all items display "OK" (blue) before selecting "Next".





c.

BCTY inspection:

HINT:

If "CHK" (red) is displayed for "BCTY", check for DTCs and perform troubleshooting based on the output DTCs (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>PARKING ASSIST MONITOR SYSTEM(w/o Side Monitor System)>DTC CHECK / CLEAR).





CALIBRATION WHEN SERVICING VEHICLE


NOTICE:

Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the parking assist monitor system (w/o Side Monitor System) may be needed (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>PARKING ASSIST MONITOR SYSTEM(w/o Side Monitor System)>CALIBRATION).