84480F
1.INSPECT MAIN SWITCH ASSEMBLY
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| 4 (ECU) - 3 (IG) | Main switch assembly on | Below 1 Ω |
| 4 (ECU) - 3 (IG) | Main switch assembly off | 10 kΩ or higher |
| *1 | Component without harness connected
(Main Switch assembly) |
If the result is not as specified, replace the main switch assembly .