Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › WIDE VIEW FRONT MONITOR SYSTEM › 2014.08–2015.08
RM2660E _56 Audio / Visual / Telematics _052831 PARK ASSIST / MONITORING _0255510 WIDE VIEW FRONT MONITOR SYSTEM D

PARK ASSIST / MONITORING  WIDE VIEW FRONT MONITOR SYSTEM  DTC CHECK / CLEAR  


CHECK DTC


a.

Connect the intelligent tester to the DLC3.


b.

Turn the engine switch on (IG).


c.

Turn the intelligent tester on.


d.

Enter the following menus: Chassis / Parking Assist Monitor System / DTC.


e.

Check the details of the DTCs (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>WIDE VIEW FRONT MONITOR SYSTEM>DIAGNOSTIC TROUBLE CODE CHART).

HINT:

The parking assist ECU may store the DTCs of the following system. If DTCs other than those specified in Diagnostic Trouble Code Chart of the parking assist monitor system are output, refer to Diagnostic Trouble Code Chart for the applicable system.

System Proceed to
Parking Assist Monitor System (w/ Side Monitor System) (Click here)
Side Monitor System (Click here)




CLEAR DTC


a.

Connect the intelligent tester to the DLC3.


b.

Turn the engine switch on (IG).


c.

Turn the intelligent tester on.


d.

Enter the following menus: Chassis / Parking Assist Monitor System / DTC.


e.

According to the display on the intelligent tester, select the trouble code data display with the clear button.