Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › SIDE MONITOR SYSTEM › 2014.08–2015.08
RM2660E _56 Audio / Visual / Telematics _052831 PARK ASSIST / MONITORING _0255511 SIDE MONITOR SYSTEM D

PARK ASSIST / MONITORING  SIDE MONITOR SYSTEM  DTC CHECK / CLEAR  


CHECK DTC


a.

Connect the intelligent tester to the DLC3.


b.

Turn the engine switch on (IG).


c.

Turn the intelligent tester on.


d.

Enter the following menus: Chassis / Parking Assist Monitor System / DTC.


e.

Check the details of the DTCs (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>SIDE MONITOR SYSTEM>DIAGNOSTIC TROUBLE CODE CHART).

HINT:

Parking assist ECU may output the DTCs of the following system. If DTCs other than those specified in Diagnostic Trouble Code Chart of the side monitor system are output, refer to Diagnostic Trouble Code Chart for the applicable system.

System Proceed to
Parking assist monitor system (w/ Side Monitor System) (Click here)
Wide view front monitor system (Click here)




CLEAR DTC


a.

Connect the intelligent tester to the DLC3.


b.

Turn the engine switch on (IG).


c.

Turn the intelligent tester on.


d.

Operate the intelligent tester to clear the codes. Enter the following menus: Chassis / Parking Assist Monitor System / DTC.


e.

According to the display on the intelligent tester, select the trouble code data display with the clear button.