Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › BLIND SPOT MONITOR SYSTEM › from 2015.08
RM2660E _56 Audio / Visual / Telematics _052831 PARK ASSIST / MONITORING _0255516 BLIND SPOT MONITOR SYSTEM A

PARK ASSIST / MONITORING  BLIND SPOT MONITOR SYSTEM  CUSTOMIZE PARAMETERS  


PROCEDURE

Hide 1.CUSTOMIZE BLIND SPOT MONITOR SYSTEM

HINT:

The following items can be customized.


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Record the current settings before customizing.



a.

Customizing with the GTS.

i.

Connect the GTS to the DLC3.


ii.

Turn the engine switch on (IG).


iii.

Turn the blind spot monitor main switch (steering pad switch assembly [multi-function switch]) on.


iv.

Turn the GTS on.


v.

Enter the following menus: Body Electrical / Blind Spot Monitor Master or Blind Spot Monitor Slave / Utility / Warning.


vi.

Select the setting by referring to the table below.

Warning
Display Default Content Setting Relevant ECU
BSM Buzzer Volume Adjust* Medium Function to adjust the buzzer volume of blind spot monitor buzzer. Low, Medium or Hight Blind Spot Monitor Sensor LH
BSM Mirror Indicator Brightness Bright This item sets brightness level of outer rear view mirror indicator. Bright or Dark Blind Spot Monitor Sensor LH
RCTA Function* ON Switches the RCTA function on and off. ON or OFF Blind Spot Monitor Sensor LH
BSM Approaching Vehicle Detection Timing Setting Middle Sets the notification timing for vehicles approaching from behind the vehicle. Only Blind Spot, Late, Middle or Early Blind Spot Monitor Sensor LH

*: w/ RCTA