Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › PARKING ASSIST MONITOR SYSTEM › from 2015.08
RM2660E _56 Audio / Visual / Telematics _052831 PARK ASSIST / MONITORING _0255517 PARKING ASSIST MONITOR SYSTEM D

PARK ASSIST / MONITORING  PARKING ASSIST MONITOR SYSTEM  INITIALIZATION  


INITIALIZE PARKING ASSIST MONITOR SYSTEM


a.

When "System initializing" is displayed on the multi-display, correct the steering angle neutral point using the following method.

i.

Fully turn the steering wheel to the right and left on a level surface.

NOTICE:

Memorizing the steering angle neutral point must be carried out with the engine running. Apply the parking brake, depress the brake pedal, check that the shift lever is in P, and ensure that the vehicle is not moving.


HINT:
·

The "?" button is displayed at the same time as "System initializing". If the "?" button is selected, this method is displayed.

·

If the steering angle neutral point cannot be memorized by fully turning the steering wheel to the right and left, perform Steering Angle Setting in Calibration (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>PARKING ASSIST MONITOR SYSTEM>CALIBRATION).