Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › PARKING ASSIST MONITOR SYSTEM › from 2015.08
RM2660E _56 Audio / Visual / Telematics _052831 PARK ASSIST / MONITORING _0255517 PARKING ASSIST MONITOR SYSTEM J

PARK ASSIST / MONITORING  PARKING ASSIST MONITOR SYSTEM  Guide Lines are Displayed with Vehicle Center Line  


DESCRIPTION

The rear television camera assembly can create parking guide lines. As this function is not necessary on vehicles with the rear view monitor system, the guide line creation function of the rear television camera assembly is disabled.

WIRING DIAGRAM

E224386E33
3.323,1.104 5.521,1.354 2.198,0.25 10 false Rear Television Camera Assembly 2.625,0.292 2.802,0.479 0.177,0.188 10 false 1 2.813,0.406 3.313,0.594 0.5,0.188 10 false CURT 3.313,0.927 3.813,1.115 0.5,0.188 10 false S31

PROCEDURE

1.CHECK SCREEN MODE
a.

Check the rear view monitor screen.

Result
Result Proceed to
Guide lines are displayed with vehicle center lines A
Guide lines are displayed without vehicle center lines B



A

B

2.CHECK HARNESS AND CONNECTOR (REAR TELEVISION CAMERA ASSEMBLY - BODY GROUND)
2.CHECK HARNESS AND CONNECTOR (REAR TELEVISION CAMERA ASSEMBLY - BODY GROUND)
a.
U166398E02
1.5,1.198 1.021,0.979 1.021,0.979 0.833,0.979 true 0.115,0.063 0.51,0.25 0.396,0.188 10 false *a 1.583,0.281 1.885,0.542 0.302,0.26 10 false S31 0.406,0.917 0.875,1.156 0.469,0.24 10 false CURT

Disconnect the rear television camera assembly connector.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
S31-1 (CURT) - Body ground Always Below 1 Ω


Text in Illustration
*a (Front view of harness connector)
(to Rear Television Camera Assembly)



OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR