Home › Power Source / Network › NETWORKING › LIN COMMUNICATION SYSTEM › 2014.08–2015.08
RM2660E _57 Power Source / Network _052837 NETWORKING _0255535 LIN COMMUNICATION SYSTEM U

NETWORKING  LIN COMMUNICATION SYSTEM  TERMINALS OF ECU  


CHECK MAIN BODY ECU (COWL SIDE JUNCTION BLOCK LH)


U163117E02
2.938,2.813 2.844,2.813 2.844,2.813 2.385,2.375 false 2.938,2.552 2.844,2.552 2.844,2.552 2.385,2.115 false 2.948,0.979 2.854,0.979 2.854,0.979 2.396,1.417 false 2.948,1.375 2.854,1.375 2.854,1.375 2.396,1.813 false 5.615,1.135 5.521,1.135 5.521,1.135 5.01,0.958 false 1.531,5.104 1.906,5.333 0.375,0.229 10 false 2D 1.073,3.563 1.448,3.792 0.375,0.229 10 false 2A 4.917,1.688 5.292,1.917 0.375,0.229 10 false 2D 1.958,1.219 2.333,1.448 0.375,0.229 10 false 2C 1.948,2.083 2.323,2.313 0.375,0.229 10 false 2B 5.656,1.052 6.031,1.281 0.375,0.229 10 false 2E 2.24,2.792 2.615,3.021 0.375,0.229 10 false 2A 2.979,2.74 3.354,2.969 0.375,0.229 10 false E4 2.99,2.448 3.365,2.677 0.375,0.229 10 false E3 3.01,1.302 3.385,1.531 0.375,0.229 10 false E2 3.01,0.906 3.385,1.135 0.375,0.229 10 false E1 4.385,5.104 4.76,5.333 0.375,0.229 10 false 2E 1.052,6.969 1.427,7.198 0.375,0.229 10 false E3 6.083,5.104 6.458,5.333 0.375,0.229 10 false E4 5.99,6.958 6.365,7.188 0.375,0.229 10 false E1 3.531,6.969 3.906,7.198 0.375,0.229 10 false E2 5.604,3.573 5.979,3.802 0.375,0.229 10 false 2C 3.042,3.573 3.417,3.802 0.375,0.229 10 false 2B

a.

Disconnect the 2D, E1, E2 and E3 ECU connectors.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
2D-62 (GND2) - Body ground W-B - Body ground Ground Always Below 1 Ω
E3-1 (GND3) - Body ground BR - Body ground Ground Always Below 1 Ω
E2-1 (AM2) - 2D-62 (GND2) W - W-B Battery power supply Always 11 to 14 V
E1-6 (AM1) - 2D-62 (GND2) W - W-B Battery power supply Always 11 to 14 V

If the result is not as specified, there may be a malfunction on the wire harness side.



CHECK MASTER SWITCH (for Models with Jam Protection Function on 4 Windows)


U163880E02
3.188,0.198 3.521,0.375 0.333,0.177 10 false I11 3.417,0.104 3.75,0.281 0.333,0.177 10 false *1 0.198,1.083 1.177,1.26 0.979,0.177 10 false *1: for LHD 0.198,1.344 1.177,1.521 0.979,0.177 10 false *2: for RHD 3.958,0.104 4.292,0.281 0.333,0.177 10 false *2 3.729,0.198 4.063,0.375 0.333,0.177 10 false I22

a.

Disconnect the I11*1 or I22*2 master switch connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

HINT:
·

*1: for LHD

·

*2: for RHD



for LHD
Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
I11-11 (B) - I11-12 (GND) L - W-B Ignition power supply Ignition switch off Below 1 Ω
I11-11 (B) - I11-12 (GND) L - W-B Ignition power supply Ignition switch ON 11 to 14 V
I11-12 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω

for RHD
Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
I22-11 (B) - I22-12 (GND) L - W-B Ignition power supply Ignition switch off Below 1 Ω
I22-11 (B) - I22-12 (GND) L - W-B Ignition power supply Ignition switch ON 11 to 14 V
I22-12 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω

If the result is not as specified, there may be a malfunction on the wire harness side.



CHECK FRONT POWER WINDOW REGULATOR MOTOR LH


U155743E04
3.469,0.271 3.802,0.448 0.333,0.177 10 false I12

a.

Disconnect the I12 motor connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
I12-2 (B) - I12-1 (GND) L - W-B Battery power supply Always 11 to 14 V
I12-1 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω

If the result is not as specified, there may be a malfunction on the wire harness side.



CHECK FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH


U155744E04
3.5,0.26 3.833,0.438 0.333,0.177 10 false I4

a.

Disconnect the I4 motor connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
I4-2 (B) - I4-1 (GND) L - W-B Battery power supply Always 11 to 14 V
I4-1 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω

If the result is not as specified, there may be a malfunction on the wire harness side.



CHECK REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY LH (for Models with Jam Protection Function on 4 Windows)


U155745E04
3.458,0.271 3.792,0.448 0.333,0.177 10 false J11

a.

Disconnect the J11 motor connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
J11-2 (B) - J11-1 (GND) L - W-B Battery power supply Always 11 to 14 V
J11-1 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω

If the result is not as specified, there may be a malfunction on the wire harness side.



CHECK REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY RH (for Models with Jam Protection Function on 4 Windows)


U155746E04
3.479,0.26 3.813,0.438 0.333,0.177 10 false J4

a.

Disconnect the J4 motor connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
J4-2 (B) - J4-1 (GND) L - W-B Battery power supply Always 11 to 14 V
J4-1 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω

If the result is not as specified, there may be a malfunction on the wire harness side.



CHECK SLIDING ROOF ECU (w/ Sliding Roof System)


U163887E02
3.5,0.24 3.708,0.396 0.208,0.156 10 false R5

a.

Disconnect the R5 ECU connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
R5-1 (B) - R5-2 (E) L - W-B Battery power supply Always 11 to 14 V
R5-2 (E) - Body ground W-B - Body ground Ground Always Below 1 Ω

If the result is not as specified, there may be a malfunction on the wire harness side.



CHECK CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)


U163852E02
2.073,0.281 2.365,0.427 0.292,0.146 10 false E29 5.115,0.292 5.406,0.438 0.292,0.146 10 false E30

a.

Disconnect the E29 ECU connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
E29-1 (+B) - E29-17 (E) B - W-B Battery power supply Always 11 to 14 V
E29-17 (E) - Body ground W-B - Body ground Ground Always Below 1 Ω

If the result is not as specified, there may be a malfunction on the wire harness side.



CHECK ID CODE BOX (IMMOBILISER CODE ECU)


U163891E02
3.594,0.177 3.927,0.354 0.333,0.177 10 false E28

a.

Disconnect the E28 ECU connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
E28-1 (+B) - E28-8 (GND) B - W-B Battery power supply Always 11 to 14 V
E28-8 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω

If the result is not as specified, there may be a malfunction on the wire harness side.



CHECK STEERING LOCK ECU


U155751E04
3.479,0.229 3.813,0.406 0.333,0.177 10 false E26

a.

Disconnect the E26 ECU connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
E26-7 (B) - E26-1 (GND) R - W-B Battery power supply Always 11 to 14 V
E26-1 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω

If the result is not as specified, there may be a malfunction on the wire harness side.



CHECK AIR CONDITIONING AMPLIFIER (for 4-ZONE Type)


U157746E03
3.885,0.271 4.156,0.448 0.271,0.177 10 false E36 5.448,0.271 5.719,0.448 0.271,0.177 10 false E35

a.

Disconnect the E36 amplifier connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
E36-5 (IG+) - E36-1 (GND) G - W-B IG power supply Ignition switch off Below 1 V
E36-5 (IG+) - E36-1 (GND) G - W-B IG power supply Ignition switch ON 11 to 14 V
E36-6 (+B1) - E36-1 (GND) R - W-B Battery power supply Always 11 to 14 V
E36-7 (+B2) - E36-1 (GND) R - W-B Battery power supply Always 11 to 14 V
E36-1 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω

If the result is not as specified, there may be a malfunction on the wire harness side.



CHECK AIR CONDITIONING AMPLIFIER (except 4-ZONE Type)


U151881E04
6.25,0.156 6.417,0.333 0.167,0.177 10 false z1 4.115,0.167 4.354,0.344 0.24,0.177 10 false J19

a.

Disconnect the E81 amplifier connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
E81-21 (+B) - E81-14 (GND) R - W-B Battery power supply Always 11 to 14 V
E81-1 (IG+) - E81-14 (GND) G - W-B IG power supply Ignition switch ON 11 to 14 V
E81-1 (IG+) - E81-14 (GND) G - W-B IG power supply Ignition switch off Below 1 V
E81-14 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω

If the result is not as specified, there may be a malfunction on the wire harness side.



CHECK FRONT AIR CONDITIONING CONTROL PANEL (w/o Navigation System)


U166058E02
3.448,0.313 3.729,0.469 0.281,0.156 10 false F10

a.

Disconnect the F10 panel connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
F10-7 (IG+) - F10-1 (GND) G - W-B IG power supply Ignition switch ON 11 to 14 V
F10-1 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω

If the result is not as specified, there may be a malfunction on the wire harness side.



CHECK REAR AIR CONDITIONING CONTROL PANEL


U165793E02
1.729,0.479 2,0.635 0.271,0.156 10 false E55 4.792,0.479 5.052,0.635 0.26,0.156 10 false z56

a.

Disconnect the E55 panel connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
E55-6 (IG) - E55-1 (E) G - W-B IG power supply Ignition switch ON 11 to 14 V
E55-1 (E) - Body ground W-B - Body ground Ground Always Below 1 Ω

If the result is not as specified, there may be a malfunction on the wire harness side.



CHECK RAIN SENSOR (w/ Rain Sensor)


U156599E06
3.49,0.167 3.813,0.344 0.323,0.177 10 false R11

a.

Disconnect the R11 rain sensor connector.


b.

Measure the voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
R11-4 (SIG) - Body ground G - Body ground IG signal circuit (to IG relay) Ignition switch off Below 1 V
Ignition switch ON 11 to 14 V
R11-1 (ES) - Body ground W - Body ground Ground circuit Always Below 1 V

If the result is not as specified, there may be a malfunction on the wire harness side.



CHECK WINDSHIELD WIPER ECU (w/ Rain Sensor)


U165926E02
2.073,0.583 2.333,0.76 0.26,0.177 10 false E83 4.615,0.563 4.875,0.74 0.26,0.177 10 false E85

a.

Disconnect the E83 and E85 ECU connectors.


b.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
E83-5 (IG1l) - E83-6 (ES) G - L Power source Ignition switch ON 11 to 14 V
E85-10 (E) - Body ground W-B - Body ground Power ground Always Below 1 Ω

If the result is not as specified, there may be a malfunction on the wire harness side.