Home › Vehicle Interior › DOOR LOCK › DOOR CONTROL TRANSMITTER(w/ Entry and Start System) › 2014.08–2015.08
RM2660E _58 Vehicle Interior _052838 DOOR LOCK _0255546 DOOR CONTROL TRANSMITTER(w/ Entry and Start System) A

DOOR LOCK  DOOR CONTROL TRANSMITTER(w/ Entry and Start System)  REMOVAL  


PROCEDURE

Hide 89745A 1.REMOVE TRANSMITTER BATTERY

NOTICE:

Take extra care when handling these precision electronic components.


a.

Push (for type A, for type B) or slide (for type C) the release hook knob and extract the emergency key.

B300503E02
1.719,0.229 2.365,0.729 0.646,0.5 10 false *A 5.156,0.271 5.802,0.771 0.646,0.5 10 false *B

Text in Illustration
*A for Type A, for Type B *B for Type C


b.

Insert a precision screwdriver into the gap, and turn the screwdriver to detach the transmitter housing cover.

NOTICE:

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.


B300504E02
1.823,1.615 2.24,2.031 2.24,2.031 2.573,2.031 false 5.344,1.656 5.76,2.073 5.76,2.073 6.083,2.073 false 2.563,1.927 2.781,2.146 0.219,0.219 10 false *1 6.094,1.979 6.313,2.198 0.219,0.219 10 false *1 1.958,0.104 2.177,0.323 0.219,0.219 10 false *A 5.458,0.125 5.677,0.344 0.219,0.219 10 false *B

Text in Illustration
*A for Type A, for Type B *B for Type C
*1 Protective Tape - -

HINT:

Tape the screwdriver tip before use.



c.

Remove the battery (lithium battery: CR1632).

B300505E01
0.888,0.232 1.180,0.452 0.292,0.221 10 *A 3.27,0.232 3.562,0.452 0.292,0.221 10 *B 5.511,0.232 5.804,0.452 0.292,0.221 10 *C

Text in Illustration
*A for Type A (lithium battery: CR1632) *B for Type B (lithium battery: CR1632)
*C for Type C (lithium battery: CR2032) - -

NOTICE:
·

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.

·

Do not push the terminals with your finger.

·

Do not forcibly pry up the battery. The terminals may be damaged.

·

Do not touch the battery with wet hands. Water may cause rust.

·

Do not touch or move any components inside the transmitter. It may interfere with proper operation.