Home › Vehicle Interior › DOOR LOCK › TRANSMITTER BATTERY(w/ Entry and Start System) › from 2015.08
RM2660E _58 Vehicle Interior _052838 DOOR LOCK _0255547 TRANSMITTER BATTERY(w/ Entry and Start System) A

DOOR LOCK  TRANSMITTER BATTERY(w/ Entry and Start System)  REPLACEMENT  


PROCEDURE

Hide 89745A 1.REMOVE TRANSMITTER BATTERY (for Type A)

NOTICE:

Take extra care when handling these precision electronic components.


a.
B364066E01
2.696,1.321 2.921,1.502 0.225,0.181 10 (1) 1.493,1.802 1.718,1.983 0.225,0.181 10 (2)

Push the release hook knob and extract the emergency key.


b.
B364068

Insert a precision screwdriver into the gap, and turn the screwdriver to detach the transmitter housing cover.

NOTICE:

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.


Text in Illustration
V100155

Protective tape

HINT:

Tape the screwdriver tip before use.



c.
B364070

Using a screwdriver, remove the transmitter battery holder.

Text in Illustration
V100155

Protective tape

HINT:

Tape the screwdriver tip before use.



d.
B364072

Using a screwdriver, remove the transmitter battery.

Text in Illustration
V100155

Protective tape

NOTICE:
·

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

·

Do not push the terminals with your finger.

·

Do not forcibly pry up the battery. The terminals may be damaged.

·

Do not touch the battery with wet hands. Water may cause rust.

·

Do not touch or move any components inside the transmitter. It may interfere with proper operation.



HINT:

Tape the screwdriver tip before use.



Hide 89745A 2.REMOVE TRANSMITTER BATTERY (for Type B)

NOTICE:

Take extra care when handling these precision electronic components.


a.
B436183E01
1.311,0.75 1.591,0.959 0.281,0.209 1.354,0.754 1.540,0.935 0.187,0.181 10 (1) 2.293,1.628 2.480,1.809 0.187,0.181 10 (2)

Slide the release hook knob and extract the emergency key.


b.
B436184

Insert a precision screwdriver into the gap, and turn the screwdriver to detach the transmitter housing cover.

NOTICE:

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.


Text in Illustration
V100155

Protective tape

HINT:

Tape the screwdriver tip before use.



c.
B436185

Remove the transmitter battery.

Text in Illustration
V100155

Protective tape

NOTICE:
·

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

·

Do not push the terminals with your finger.

·

Do not forcibly pry up the battery. The terminals may be damaged.

·

Do not touch the battery with wet hands. Water may cause rust.

·

Do not touch or move any components inside the transmitter. It may interfere with proper operation.




Hide 89745A 3.INSTALL TRANSMITTER BATTERY (for Type A)

a.
B364073

Install a new transmitter battery (lithium battery: CR2032) with the positive (+) side facing upward as shown in the illustration.

NOTICE:
·

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

·

Do not bend the transmitter battery electrode during insertion.

·

Keep the transmitter cover interior free of dust and oil.




b.
B364071

Install the transmitter battery holder.


c.
B364069

Install the transmitter housing cover by pressing down on it as shown in the illustration.


d.
B364067

Insert the mechanical key as shown in the illustration.


e.

Press one of the transmitter switches and check that the LED illuminates.


Hide 89745A 4.INSTALL TRANSMITTER BATTERY (for Type B)

a.
B436186

Install a new transmitter battery with the positive (+) side facing upward as shown in the illustration.

NOTICE:
·

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

·

Do not bend the transmitter battery electrode during insertion.

·

Keep the transmitter cover interior free of dust and oil.




b.
B436187

Install the transmitter housing cover by pressing down on it as shown in the illustration.


c.
B436188

Insert the mechanical key into the transmitter.


d.

Press one of the transmitter switches and check that the LED illuminates.