Home › Vehicle Interior › DOOR LOCK › WIRELESS DOOR LOCK CONTROL SYSTEM(w/ Entry and Start System) › 2014.08–2015.08
RM2660E _58 Vehicle Interior _052838 DOOR LOCK _0255548 WIRELESS DOOR LOCK CONTROL SYSTEM(w/ Entry and Start System) U

DOOR LOCK  WIRELESS DOOR LOCK CONTROL SYSTEM(w/ Entry and Start System)  TERMINALS OF ECU  


CHECK MAIN BODY ECU (COWL SIDE JUNCTION BLOCK LH)


U164693E02
2.875,1.083 2.781,1.083 2.781,1.083 2.365,1.344 false 5.5,0.708 5.417,0.708 5.417,0.708 5,0.969 false 2.875,1.625 2.802,1.625 2.802,1.625 2.396,1.781 false 2.917,2.635 2.823,2.635 2.823,2.635 2.406,2.385 false 2.875,2.24 2.802,2.24 2.802,2.24 2.396,2.146 false 2.406,2.74 2.635,2.906 0.229,0.167 10 false 2A 1.083,3.625 1.313,3.792 0.229,0.167 10 false 2A 1.958,2.042 2.167,2.208 0.208,0.167 10 false 2B 3.094,3.625 3.302,3.792 0.208,0.167 10 false 2B 1.969,1.167 2.177,1.333 0.208,0.167 10 false 2C 5.646,3.625 5.854,3.792 0.208,0.167 10 false 2C 4.948,1.698 5.156,1.865 0.208,0.167 10 false 2D 1.542,5.167 1.75,5.333 0.208,0.167 10 false 2D 4.417,5.167 4.625,5.333 0.208,0.167 10 false 2E 5.542,0.625 5.75,0.792 0.208,0.167 10 false 2E 2.917,1.01 3.135,1.177 0.219,0.167 10 false E1 6.042,7 6.26,7.167 0.219,0.167 10 false E1 2.917,1.552 3.135,1.719 0.219,0.167 10 false E2 3.563,7.01 3.781,7.177 0.219,0.167 10 false E2 2.938,2.156 3.156,2.323 0.219,0.167 10 false E3 1.073,7 1.292,7.167 0.219,0.167 10 false E3 2.979,2.542 3.198,2.708 0.219,0.167 10 false E4 6.094,5.083 6.313,5.25 0.219,0.167 10 false E4

a.

Disconnect the 2A, 2D and E3 ECU connectors.


b.

Measure the resistance and voltage according to value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
2D-62 (GND2) - Body ground W-B - Body ground Ground Always Below 1 Ω
E3-1 (GND3) - Body ground BR - Body ground Ground Always Below 1 Ω
2A-1 (ACC) - 2D-62 (GND2) B - W-B ACC power supply Engine switch on (ACC) 11 to 14 V
2A-1 (IG) - 2D-62 (GND2) B - W-B IG power supply Engine switch on (IG) 11 to 14 V

If the result is not as specified, there may be a malfunction on the wire harness side.



c.

Reconnect the 2A, 2D and E3 ECU connectors.


d.

Measure the voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
E1-24 (DCTY) - Body ground L - Body ground*1
Y - Body ground*2
Driver side door courtesy light switch input Driver side door open Below 1 Ω
Driver side door closed 10 kΩ or higher
E2-21 (PCTY) - Body ground Y - Body ground*1
L - Body ground*2
Passenger side door courtesy light switch input Passenger side door open Below 1 Ω
Passenger side door closed 10 kΩ or higher
2C-2 (LCTY) - Body ground W - Body ground Rear side door LH courtesy light switch input Rear side door LH open Below 1 Ω
Rear side door LH closed 10 kΩ or higher
E2-7 (RCTY) - Body ground G - Body ground Rear side door RH courtesy light switch input Rear side door RH open Below 1 Ω
Rear side door RH closed 10 kΩ or higher
E2-25 (BCTY) - Body ground W - Body ground Back door courtesy light switch input Back door open Below 1 Ω
Back door closed 10 kΩ or higher
E3-7 (HZSW) - Body ground*4 BE - Body ground Turn signal light drive Hazard warning signal switch on Pulse generation
Hazard warning signal switch off Below 1 V
E2-15 (DIM) - 2D-62 (GND2)*3 L - W-B Headlight low drive Headlight dimmer switch low 11 to 14 V
2B-18 (HRLY) - 2D-62 (GND2)*3 L - W-B Headlight (high) drive Headlight dimmer switch high 11 to 14 V
2A-1 (TRLY) - 2D-62 (GND2)*3 B - W-B Taillight drive Headlight dimmer switch tail 11 to 14 V

*1: for LHD

*2: for RHD

*3: w/ Panic Switch

*4: for GRJ200L-GNANKC, URJ202L-GNTEKC


If the result is not as specified, the ECU may have a malfunction.


e.
B122376

Using an oscilloscope, check waveform 1.

Waveform 1 (Reference)
Item Content
Terminal No. (Symbol) E1-24 (DCTY) - Body ground
Tool Setting 5 V/DIV., 20 ms/DIV.
Condition Engine switch off, and driver side door courtesy switch off


f.
B129408

Using an oscilloscope, check waveform 2.

Waveform 2 (Reference)
Item Content
Terminal No. (Symbol) E1-24 (DCTY) - Body ground
Tool Setting 5 V/DIV., 20 ms/DIV.
Condition Engine switch off, and driver side door courtesy switch off


g.
B189909E01
0.084,1.127 0.410,1.308 0.326,0.181 10 GND

Using an oscilloscope, check waveform 3.

Waveform 3 (Reference)
Item Content
Terminal No. (Symbol) E2-21 (PCTY) - Body ground
Tool Setting 5 V/DIV., 20 ms/DIV.
Condition Engine switch off, and passenger side door courtesy switch off


h.
B449865E01
0.385,1.031 0.844,1.229 0.458,0.198 10 false GND

Using an oscilloscope, check waveform 4.

Waveform 4 (Reference)
Item Content
Terminal No. (Symbol) E2-21 (PCTY) - Body ground
Tool Setting 5 V/DIV., 20 ms/DIV.
Condition Engine switch off, and passenger side door courtesy switch off


i.
B122376

Using an oscilloscope, check waveform 5.

Waveform 5 (Reference)
Item Content
Terminal No. (Symbol) 2C-2 (LCTY) - Body ground
Tool Setting 5 V/DIV., 20 ms/DIV.
Condition Engine switch off, and rear LH side door courtesy switch off


j.
B129408

Using an oscilloscope, check waveform 6.

Waveform 6 (Reference)
Item Content
Terminal No. (Symbol) 2C-2 (LCTY) - Body ground
Tool Setting 5 V/DIV., 20 ms/DIV.
Condition Engine switch off, and rear LH side door courtesy switch off


k.
B122376

Using an oscilloscope, check waveform 7.

Waveform 7 (Reference)
Item Content
Terminal No. (Symbol) E2-7 (RCTY) - Body ground
Tool Setting 5 V/DIV., 20 ms/DIV.
Condition Engine switch off, and rear RH side door courtesy switch off


l.
B129408

Using an oscilloscope, check waveform 8.

Waveform 8 (Reference)
Item Content
Terminal No. (Symbol) E2-7 (RCTY) - Body ground
Tool Setting 5 V/DIV., 20 ms/DIV.
Condition Engine switch off, and rear RH side door courtesy switch off


m.
B122376

Using an oscilloscope, check waveform 9.

Waveform 9 (Reference)
Item Content
Terminal No. (Symbol) E2-25 (BCTY) - Body ground
Tool Setting 5 V/DIV., 20 ms/DIV.
Condition Engine switch off, and Back door closed


n.
B129408

Using an oscilloscope, check waveform 10.

Waveform 10 (Reference)
Item Content
Terminal No. (Symbol) E2-25 (BCTY) - Body ground
Tool Setting 5 V/DIV., 20 ms/DIV.
Condition Engine switch off, and Back door closed



CHECK CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)


U163839E02
2.083,0.188 2.406,0.385 0.323,0.198 10 false E29 5.135,0.177 5.458,0.375 0.323,0.198 10 false E30

a.

Disconnect the E29 and E30 ECU connectors.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
E29-17 (E) - Body ground W-B - Body ground Ground Always Below 1 Ω
E29-1 (+B) - E29-17 (E) B - W-B Battery power supply Always 11 to 14 V
E29-18 (IG) - E29-17 (E) B - W-B IG power supply Engine switch on (IG) 11 to 14 V
Engine switch off Below 1 V

If the result is not as specified, there may be a malfunction on the wire harness side.



c.

Reconnect the E29 and E30 ECU connectors.


d.

Measure the voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
E29-39 (RSSI) - E29-17 (E) L - W-B Door control receiver electric wave existence signal Engine switch off, all doors closed and transmitter switch not pressed → pressed 11 to 14 V → Below 1 V
E29-38 (RDA) - E29-17 (E) LG - W-B Door control receiver data input signal Engine switch off, all doors closed and transmitter switch not pressed → pressed Below 1 V → 11 to 14 V → Below 1 V
E29-29 (RCO) - E29-17 (E) B - W-B Door control receiver power source Engine switch off, all doors closed and transmitter switch not pressed → pressed Below 1 V → 4.6 to 5.4 V → Below 1 V
E29-21 (BZR) - Body ground* LG - Body ground Wireless door lock buzzer output Wireless door lock buzzer ON 11 to 14 V
E29-21 (BZR) - Body ground* LG - Body ground Wireless door lock buzzer output Wireless door lock buzzer OFF Below 1 V

HINT:

*: Except Europe and China


If the result is not as specified, the ECU may have a malfunction.




CHECK DOOR CONTROL RECEIVER


U166025E02
3.417,0.333 3.698,0.49 0.281,0.156 10 false L21

a.

Disconnect the L21 receiver connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
L21-1 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
L21-4 (+5) - Body ground B - Body ground Battery power supply Always 4.6 to 5.4 V

If the result is not as specified, there may be a malfunction on the wire harness side.




CHECK POWER BACK DOOR UNIT (w/ Power Back Door System)


U166656E02
3.479,0.615 4.063,0.802 0.583,0.188 10 false L52

a.

Disconnect the L52 unit connector.


b.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
L52-11 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
L52-10 (ECUB) - Body ground R - Body ground Battery power supply Always 11 to 14 V

If the result is not as specified, there may be a malfunction on the wire harness side.


c.

Reconnect the L52 unit connector.


d.

Measure the voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
L52-26 (BZR+) - Body ground L - Body ground Power back door warning buzzer signal Back door warning buzzer is sounding 11 to 14 V
Pulse generation
L52-26 (BZR+) - Body ground L - Body ground Power back door warning buzzer signal Back door warning buzzer is stopped Below 1 V

If the result is not as specified, the ECU may have a malfunction.