Home › Vehicle Interior › DOOR LOCK › POWER DOOR LOCK CONTROL SYSTEM › from 2015.08
RM2660E _58 Vehicle Interior _052838 DOOR LOCK _0255549 POWER DOOR LOCK CONTROL SYSTEM L

DOOR LOCK  POWER DOOR LOCK CONTROL SYSTEM  PRECAUTION  


IGNITION SWITCH EXPRESSIONS


HINT:

The type of ignition switch used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section.

Expression Ignition Switch (Position) Engine Switch (Condition)
Ignition Switch off LOCK Off
Ignition Switch ON ON On (IG)
Ignition Switch ACC ACC On (ACC)
Engine Start START Start



PRECAUTION WHEN REPLACING MAIN BODY ECU


a.

As the door control battery is installed between the vehicle battery and main body ECU, first perform the inspections in On-Vehicle Inspection to confirm that there are no malfunctions in the power source circuit for the main body ECU before performing this troubleshooting procedure (See page Vehicle Interior>DOOR LOCK>POWER DOOR LOCK CONTROL SYSTEM>ON-VEHICLE INSPECTION).


b.

If the MPX-B NO.1 fuse (the main power source fuse of the cowl side junction block LH) is removed with the door control battery charged, power will be supplied to the main body ECU from the door control battery for up to 30 minutes. At this time, the main body ECU will be able to function with the MPX-B NO.1 fuse (the main power source fuse of the cowl side junction block LH) removed.