Home › Vehicle Interior › DOOR LOCK › POWER DOOR LOCK CONTROL SYSTEM › 2014.08–2015.08
RM2660E _58 Vehicle Interior _052838 DOOR LOCK _0255549 POWER DOOR LOCK CONTROL SYSTEM U

DOOR LOCK  POWER DOOR LOCK CONTROL SYSTEM  TERMINALS OF ECU  


CHECK MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY


U163882E02
3.021,0.302 3.24,0.479 0.219,0.177 10 false I22 3.031,0.063 3.25,0.24 0.219,0.177 10 false I11 3.302,0.063 3.521,0.24 0.219,0.177 10 false *1 3.313,0.292 3.531,0.469 0.219,0.177 10 false *2 3.521,0.073 3.74,0.25 0.219,0.177 10 false *3 3.51,0.292 3.729,0.469 0.219,0.177 10 false *3 3.833,0.302 4.052,0.479 0.219,0.177 10 false I26 3.833,0.063 4.052,0.24 0.219,0.177 10 false I31 4.125,0.052 4.344,0.229 0.219,0.177 10 false *1 4.115,0.292 4.333,0.469 0.219,0.177 10 false *2 4.323,0.063 4.542,0.24 0.219,0.177 10 false *4 4.313,0.292 4.531,0.469 0.219,0.177 10 false *4 0.063,0.302 1.01,0.479 0.948,0.177 10 false *1: for LHD 1.188,0.302 1.948,0.479 0.76,0.177 10 false *2: for RHD 0.063,0.688 2.208,1.031 2.146,0.344 10 false *3: for Models with Jam Protection Function on 4 Windows 0.063,1.208 2.542,1.552 2.479,0.344 10 false *4: for Models with Jam Protection Function on Driver Door Window Only

a.

for Models with Jam Protection Function on 4 Windows

i.

Disconnect the I11*1 or I22*2 switch connector.

HINT:

*1: for LHD

*2: for RHD



ii.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
I11-12 (GND) - Body ground*1 W-B - Body ground Ground Always Below 1 Ω
I11-11 (B) - I11-12 (GND)*1 L - W-B Battery power supply Always 11 to 14 V
I22-12 (GND) - Body ground*2 W-B - Body ground Ground Always Below 1 Ω
I22-11 (B) - I22-12 (GND)*2 L - W-B Battery power supply Always 11 to 14 V

HINT:

*1: for LHD

*2: for RHD


If the result is not as specified, there may be a malfunction on the wire harness side.



b.

for Models with Jam Protection Function on Driver Door Window Only

i.

Disconnect the I31*1 or I26*2 switch connector.

HINT:

*1: for LHD

*2: for RHD



ii.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
I31-1 (E) - Body ground*1 W-B - Body ground Ground Always Below 1 Ω
I31-6 (B) - I31-1 (E)*1 L - W-B Battery power supply Always 11 to 14 V
I26-9 (E) - Body ground*2 W-B - Body ground Ground Always Below 1 Ω
I26-6 (B) - I26-9 (E)*2 L - W-B Battery power supply Always 11 to 14 V

HINT:

*1: for LHD

*2: for RHD


If the result is not as specified, there may be a malfunction on the wire harness side.




CHECK MAIN BODY ECU (COWL SIDE JUNCTION BLOCK LH)


U164692E05
2.875,1.094 2.781,1.094 2.781,1.094 2.365,1.354 true 5.51,0.698 5.427,0.698 5.427,0.698 5.01,0.958 true 2.865,1.635 2.792,1.635 2.792,1.635 2.385,1.792 true 2.906,2.635 2.813,2.635 2.813,2.635 2.396,2.385 true 2.885,2.229 2.813,2.229 2.813,2.229 2.406,2.135 true 2.24,2.792 2.469,2.958 0.229,0.167 10 false 2A 1.083,3.635 1.313,3.802 0.229,0.167 10 false 2A 1.958,2.042 2.208,2.24 0.25,0.198 10 false 2B 3.083,3.635 3.292,3.802 0.208,0.167 10 false 2B 1.958,1.177 2.167,1.344 0.208,0.167 10 false 2C 5.635,3.635 5.844,3.802 0.208,0.167 10 false 2C 4.938,1.656 5.146,1.823 0.208,0.167 10 false 2D 1.552,5.177 1.76,5.344 0.208,0.167 10 false 2D 4.406,5.177 4.615,5.344 0.208,0.167 10 false 2E 5.552,0.615 5.76,0.781 0.208,0.167 10 false 2E 2.917,1.021 3.135,1.188 0.219,0.167 10 false E1 6.042,7.01 6.26,7.177 0.219,0.167 10 false E1 2.917,1.542 3.135,1.708 0.219,0.167 10 false E2 3.531,7.01 3.75,7.177 0.219,0.167 10 false E2 2.917,2.146 3.135,2.313 0.219,0.167 10 false E3 1.063,7 1.281,7.167 0.219,0.167 10 false E3 2.948,2.552 3.167,2.719 0.219,0.167 10 false E4 6.094,5.083 6.313,5.25 0.219,0.167 10 false E4

a.

Disconnect the 2A, 2B and 2D ECU connectors.


b.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
2B-20 (BATB) - Body ground L - Body ground Battery power supply Always 11 to 14 V
2A-1 (ACC) - Body ground B - Body ground ACC power supply Ignition switch ACC 11 to 14 V
2A-1 (ACC) - Body ground B - Body ground ACC power supply Ignition switch off Below 1 Ω
2D-62 (GND2) - Body ground W-B - Body ground Ground Always Below 1 Ω

If the result is not as specified, there may be a malfunction on the wire harness side.


c.

Reconnect the 2A, 2B and 2D ECU connectors.


d.

Measure the voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
E1-24 (DCTY) - Body ground L*1 - Body ground
Y*2 - Body ground
Driver side door courtesy switch input Driver side door open Below 1 V
E1-24 (DCTY) - Body ground L*1 - Body ground
Y*2 - Body ground
Driver side door courtesy switch input Ignition switch off, and driver side door courtesy switch off Pulse generation
E2-21 (PCTY) - Body ground Y*1 - Body ground
L*2 - Body ground
Front passenger side door courtesy switch input Front passenger side door open Below 1 V
E2-21 (PCTY) - Body ground Y*1 - Body ground
L*2 - Body ground
Front passenger side door courtesy switch input Ignition switch off, and passenger side door courtesy switch off Pulse generation
2C-2 (LCTY) - Body ground W - Body ground Rear door LH courtesy light switch input Rear door LH open Below 1 V
2C-2 (LCTY) - Body ground W - Body ground Rear door LH courtesy light switch input Ignition switch off, and rear LH side door courtesy switch off Pulse generation
E2-7 (RCTY) - Body ground
*3
G - Body ground Rear door RH courtesy light switch input Rear door RH open Below 1 V
E2-7 (RCTY) - Body ground
*3
G - Body ground Rear door RH courtesy light switch input Ignition switch off, and rear RH side door courtesy switch off Pulse generation
E1-17 (RCTY) - Body ground
*4
G - Body ground Rear door RH courtesy light switch input Rear door RH open Below 1 V
E1-17 (RCTY) - Body ground
*4
G - Body ground Rear door RH courtesy light switch input Ignition switch off, and rear RH side door courtesy switch off Pulse generation
E2-25 (BCTY) - Body ground W - Body ground Back door courtesy light switch input Back door open Below 1 V
E2-25 (BCTY) - Body ground W - Body ground Back door courtesy light switch input Ignition switch off, and back door closed Pulse generation
2D-3 (ACT+) - Body ground L - Body ground Door lock motor LOCK drive output Master switch (door control switch) or driver side door key cylinder in neutral position Below 1 V
2D-3 (ACT+) - Body ground L - Body ground Door lock motor LOCK drive output Master switch (door control switch) or driver side door key cylinder in lock position 11 to 14 V
2C-24 (ACT+) - Body ground L - Body ground Door lock motor LOCK drive output Master switch (door control switch) or driver side door key cylinder in neutral position Below 1 V
2C-24 (ACT+) - Body ground L - Body ground Door lock motor LOCK drive output Master switch (door control switch) or driver side door key cylinder in lock position 11 to 14 V
E1-5 (ACTD) - Body ground B - Body ground Door lock motor UNLOCK drive output Master switch (door control switch) or driver side door key cylinder in neutral position Below 1 V
E1-5 (ACTD) - Body ground B - Body ground Door lock motor UNLOCK drive output Master switch (door control switch) or driver side door key cylinder in unlock position 11 to 14 V
2D-2 (ACT-) - Body ground B - Body ground Door lock motor UNLOCK drive output Master switch (door control switch) or driver side door key cylinder in neutral position Below 1 V
2D-2 (ACT-) - Body ground B - Body ground Door lock motor UNLOCK drive output Master switch (door control switch) or driver side door key cylinder in unlock position 11 to 14 V
2C-23 (ACT-) - Body ground B - Body ground Door lock motor UNLOCK drive output Master switch (door control switch) or driver side door key cylinder in neutral position Below 1 V
2C-23 (ACT-) - Body ground B - Body ground Door lock motor UNLOCK drive output Master switch (door control switch) or driver side door key cylinder in unlock position 11 to 14 V
E1-10 (UL3) - Body ground Y*1 - Body ground
L*2 - Body ground
Driver side door lock key switch input Driver side door key cylinder in unlock position Below 1 V
E1-10 (UL3) - Body ground Y*1 - Body ground
L*2 - Body ground
Driver side door lock key switch input Ignition switch off, all doors closed and driver side door key cylinder in neutral position Pulse generation
2D-53 (L2) - Body ground LG - Body ground Driver side door lock key switch input Driver side door key cylinder in lock position Below 1 V
2D-53 (L2) - Body ground LG - Body ground Driver side door lock key switch input Ignition switch off, all doors closed and driver side door key cylinder in neutral position Pulse generation
2D-52 (UL1) - Body ground
*4
W - Body ground Master switch (door control switch) input Master switch (door control switch) in unlock position Below 1 V
2D-52 (UL1) - Body ground
*4
W - Body ground Master switch (door control switch) input Master switch (door control switch) in neutral position Pulse generation
2D-52 (UL1) - Body ground
*4
G - Body ground Door control switch assembly input Door control switch assembly in unlock position Below 1 V
2D-52 (UL1) - Body ground
*4
G - Body ground Door control switch assembly input Door control switch assembly in neutral position Pulse generation
2D-49 (L1) - Body ground
*4
BE - Body ground Master switch (door control switch) input Master switch (door control switch) in unlock position Below 1 V
2D-49 (L1) - Body ground
*4
BE - Body ground Master switch (door control switch) input Master switch (door control switch) in neutral position Pulse generation
2D-49 (L1) - Body ground
*4
R - Body ground Door control switch assembly input Door control switch assembly in unlock position Below 1 V
2D-49 (L1) - Body ground
*4
R - Body ground Door control switch assembly input Door control switch assembly in neutral position Pulse generation
E1-1 (TR+) - Body ground
*3
L - Body ground Back door lock motor UNLOCK drive output Master switch (door control switch) or driver side door key cylinder in neutral position Below 1 V
E1-1 (TR+) - Body ground
*3
L - Body ground Back door lock motor UNLOCK drive output Master switch (door control switch) or driver side door key cylinder in unlock position 11 to 14 V
E1-9 (LSWD) - Body ground BR*5 - Body ground
BE*6 - Body ground
Driver side door lock position switch input Driver side door unlocked Below 1 V
E1-9 (LSWD) - Body ground BR*5 - Body ground
BE*6 - Body ground
Driver side door lock position switch input Ignition switch off, all doors closed and driver side door locked Pulse generation
E2-27 (LSWP) - Body ground Y*1 - Body ground
BR*2*5 - Body ground
BE*6 - Body ground
Front passenger side door lock position switch input Front passenger side door unlocked Below 1 V
E2-27 (LSWP) - Body ground Y*1 - Body ground
BR*2*5 - Body ground
BE*6 - Body ground
Front passenger side door lock position switch input Ignition switch off, all doors closed and passenger side door locked Pulse generation
2C-1 (LSWL) - Body ground BR*5 - Body ground
BE*6 - Body ground
Rear door LH lock position switch input Rear door LH unlocked Below 1 V
2C-1 (LSWL) - Body ground BR*5 - Body ground
BE*6 - Body ground
Rear door LH lock position switch input Ignition switch off, all doors closed and rear door LH locked Pulse generation
E2-5 (LSWR) - Body ground BR*5 - Body ground
BE*6 - Body ground
Rear door RH lock position switch input Rear door RH unlocked Below 1 V
E2-5 (LSWR) - Body ground BR*5 - Body ground
BE*6 - Body ground
Rear door RH lock position switch input Ignition switch off, all doors closed and rear door RH locked Pulse generation
E2-2 (LSWB) - Body ground
*4
LG - Body ground Back door lock position switch input Back door unlocked Below 1 V
E2-2 (LSWB) - Body ground
*4
LG - Body ground Back door lock position switch input Ignition switch off, all doors closed and back door locked Pulse generation
E1-26 (BDSU) - Body ground
*3
L - Body ground Back door opener switch input Back door lock opener switch off Below 1 V
E1-26 (BDSU) - Body ground
*3
L - Body ground Back door opener switch input Back door lock opener switch on Pulse generation

HINT:

*1: for LHD

*2: for RHD

*3: w/ Entry and Start System

*4: w/o Entry and Start System

*5: for GRJ200L-GNANKC, URJ202L-GNTEKC

*6: except GRJ200L-GNANKC, URJ202L-GNTEKC


If the result is not as specified, the ECU may have a malfunction.



CHECK DOUBLE LOCK DOOR CONTROL RELAY (w/ Double Locking Function)


U165784E02
3.344,0.25 3.625,0.406 0.281,0.156 10 false E86

a.

Disconnect the E86 double lock door control relay connector.


b.

Measure the voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
E86-1 (+B) - E86-14 (GND) B - W-B Battery power supply Always 11 to 14 V
E86-7 (CPUB) - E86-14 (GND) R - W-B ECU power supply Always 11 to 14 V
E86-14 (GND) - Body ground W-B - Body ground Ground Always Below 1 V

If the result is not as specified, there may be a malfunction on the wire harness side.


c.

Reconnect the E86 double lock door control relay connector.


d.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
E86-4 (ACTR) - E86-14 (GND) P - W-B All door double lock motor off signal Door lock set → unset Below 1 V → 11 to 14 V → Below 1 V
E86-3 (ACTS) - E86-14 (GND) G - W-B All door double lock motor on signal Door lock unset → set Below 1 V → 11 to 14 V → Below 1 V
E86-5 (DLPD) - E86-14 (GND) BR*1 - Body ground
BE*2 - Body ground
Double lock position switch signal Double lock set Below 1 Ω
E86-5 (DLPD) - E86-14 (GND) BR*1 - Body ground
BE*2 - Body ground
Double lock position switch signal Double lock unset 10 kΩ or higher
E86-6 (DLPP) - E86-14 (GND) GR - W-B Double lock position switch signal Double lock set Below 1 Ω
E86-6 (DLPP) - E86-14 (GND) GR - W-B Double lock position switch signal Double lock unset 10 kΩ or higher
E86-11 (DLPR) - E86-14 (GND) Y*1 - W-B
SB*2 - W-B
Double lock position switch signal Double lock set Below 1 Ω
E86-11 (DLPR) - E86-14 (GND) Y*1 - W-B
SB*2 - W-B
Double lock position switch signal Double lock unset 10 kΩ or higher
E86-12 (DLPL) - E86-14 (GND) LG - W-B Double lock position switch signal Double lock set Below 1 Ω
E86-12 (DLPL) - E86-14 (GND) LG - W-B Double lock position switch signal Double lock unset 10 kΩ or higher

HINT:

*1: for GRJ200L-GNANKC, URJ202L-GNTEKC

*2: except GRJ200L-GNANKC, URJ202L-GNTEKC


If the result is not as specified, the ECU may have a malfunction.