Home › Vehicle Interior › DOOR LOCK › BACK DOOR LOCK (for Double Swing Out Type)
RM2660E _58 Vehicle Interior _052838 DOOR LOCK _0255554 BACK DOOR LOCK(for Double Swing Out Type) A

DOOR LOCK  BACK DOOR LOCK(for Double Swing Out Type)  INSTALLATION  


PROCEDURE

Hide 69110A 1.INSTALL BACK DOOR LOCK ASSEMBLY

a.

Apply MP grease to the sliding parts of the back door lock assembly.


b.
B292790

Using a T30 "TORX" socket wrench, install the back door lock assembly with the 4 screws.

Torque:
5.0 N*m (51 kgf*cm, 44 in.*lbf)


c.

Connect the 2 connectors.


d.
B293542E02
2.906,0.74 3.104,0.74 true 0.49,2.844 0.49,3.052 false 2.448,0.375 2.135,0.135 2.135,0.135 1.927,0.135 true 2.344,1.073 1.969,0.583 1.969,0.583 1.719,0.583 true 0.865,3.042 0.865,3.146 false 3.115,0.646 3.281,0.813 0.167,0.167 10 false *1 0.417,3.094 0.583,3.26 0.167,0.167 10 false *5 1.531,0.49 1.698,0.656 0.167,0.167 10 false *2 1.74,0.042 1.906,0.208 0.167,0.167 10 false *3 0.792,3.146 0.958,3.313 0.167,0.167 10 false *4

Connect the back door lock cable assembly to the back door remote control assembly.


e.

Connect the back door lock locking link to the back door lock control assembly and rotate the snap as shown in the illustration.

Text in Illustration
*1 Snap
*2 Back Door Lock Locking Link
*3 Back Door Lock Control Assembly
*4 Back Door Remote Control Assembly
*5 Back Door Lock Cable Assembly


Hide 69290F 3.INSTALL BACK DOOR INSIDE HANDLE ASSEMBLY LH

Hide 74624B 4.INSTALL REAR ASSIST GRIP REINFORCEMENT LH

Hide 64790C 5.INSTALL BACK DOOR TRIM PANEL ASSEMBLY LH