Home › Vehicle Interior › DOOR LOCK › UNLOCK WARNING SWITCH
RM2660E _58 Vehicle Interior _052838 DOOR LOCK _0255555 UNLOCK WARNING SWITCH G

DOOR LOCK  UNLOCK WARNING SWITCH  INSPECTION  


PROCEDURE

Hide 84052 1.INSPECT UNLOCK WARNING SWITCH ASSEMBLY

E178151E08
0.082,1.484 0.375,1.688 0.293,0.204 10 *c 1.399,0.003 2.215,0.258 0.817,0.255 10 *a 1.408,0.355 1.976,0.589 0.569,0.234 10 *b 2.265,2.952 2.594,3.121 0.329,0.168 10 UN+ 0.337,2.952 0.666,3.121 0.329,0.168 10 UN- 1.651,3.043 2.234,3.043 false 1.353,3.049 0.68,3.049 false

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 (UN+) - 2 (UN-) Not pushed 10 kΩ or higher
Pushed Below 1 Ω


If the result is not as specified, replace the unlock warning switch assembly.

Text in Illustration
*a Not Pushed
*b Pushed
*c Component without harness connected
(Unlock Warning Switch Assembly)