Home › Vehicle Interior › DOOR LOCK › TRANSMITTER BATTERY(w/o Entry and Start System) › 2014.08–2015.08
RM2660E _58 Vehicle Interior _052838 DOOR LOCK _0255556 TRANSMITTER BATTERY(w/o Entry and Start System) A

DOOR LOCK  TRANSMITTER BATTERY(w/o Entry and Start System)  REPLACEMENT  


CAUTION / NOTICE / HINT

NOTICE:

Take extra care when handling these precision electronic components.


PROCEDURE

Hide 89751A 1.REMOVE TRANSMITTER HOUSING COVER

a.
U122533E01
3.039,2.042 3.414,2.172 0.375,0.13 1.884,1.382 2.586,1.726 0.702,0.344 10 *1 1.241,1.008 1.647,1.457 1.647,1.457 1.849,1.457 false 0.053,2.019 0.213,2.172 0.16,0.152

Twist a screwdriver in the direction of the arrow in the illustration and remove the transmitter housing cover.

NOTICE:

Do not forcibly pry open the cover.


HINT:

Tape the screwdriver tip before use.


Text in Illustration
*1 Protective Tape


Hide 89071B 2.REMOVE DOOR CONTROL TRANSMITTER MODULE

a.
B137124E01
0.621,0.51 0.865,0.916 0.244,0.406 10 *1 1.692,0.736 1.13,0.605 1.13,0.605 0.871,0.605 false

Using a precision screwdriver, remove the door control transmitter module.

NOTICE:

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.


HINT:

Tape the screwdriver tip before use.


Text in Illustration
*1 Protective Tape


Hide 89745C 3.REMOVE TRANSMITTER BATTERY

a.
B102246

Twist a coin in the direction of the arrow in the illustration and remove the transmitter battery cover.

NOTICE:

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.



b.
B102247

Remove the battery (lithium battery: CR2016).

NOTICE:
·

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.

·

Do not push the terminals with your finger.

·

Do not forcibly pry up the battery. The terminals may become damaged.

·

Do not touch the battery with wet hands. Water may cause rust.

·

Do not touch or move any components inside the transmitter. the transmitter may cease to work.




Hide 89745C 4.INSTALL TRANSMITTER BATTERY

a.
B102768

Install a new battery (lithium battery: CR2016) with the positive (+) side facing upward as shown in the illustration.

NOTICE:
·

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.

·

Be careful not to bend the transmitter battery electrode during insertion.

·

Keep the transmitter battery cover interior free of dust and oil.




b.
B137137

Install the transmitter battery cover.

NOTICE:

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.



Hide 89071B 5.INSTALL DOOR CONTROL TRANSMITTER MODULE

a.
B137125

Install the door control transmitter module.

NOTICE:

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.



Hide 89751A 6.INSTALL TRANSMITTER HOUSING COVER

a.
B225783

Install the transmitter housing cover to the transmitter housing case.


b.

Check that the transmitter LED illuminates 3 times when a switch is pressed 3 times.