Home › Vehicle Interior › DOOR LOCK › TRANSMITTER BATTERY(w/o Entry and Start System) › from 2015.08
RM2660E _58 Vehicle Interior _052838 DOOR LOCK _0255556 TRANSMITTER BATTERY(w/o Entry and Start System) A

DOOR LOCK  TRANSMITTER BATTERY(w/o Entry and Start System)  REPLACEMENT  


CAUTION / NOTICE / HINT

NOTICE:

Take extra care when handling these precision electronic components.


PROCEDURE

Hide 89751A 1.REMOVE TRANSMITTER HOUSING COVER

a.
B317344E03
1.001,1.496 1.197,1.688 0.196,0.192 10 *1 1.514,1.448 1.168,1.581 false

Using a precision screwdriver, pry open the transmitter housing cover.

NOTICE:

Do not forcibly pry open the cover.


HINT:
·

Tape the screwdriver tip before use.

·

Open the cover as shown in the illustration so as not to drop the button.



Text in Illustration
*1 Protective Tape


Hide 89071B 2.REMOVE DOOR CONTROL TRANSMITTER MODULE

a.
B317346E03
0.56,0.578 0.755,0.788 0.195,0.210 10 *1 1.363,0.667 0.753,0.686 false

Using a precision screwdriver, remove the door control transmitter module from the transmitter housing case.

NOTICE:

Handle each part with care as they are delicate electrical parts.


HINT:
·

Tape the screwdriver tip before use.

·

When removing the module, be careful not to drop the button.



Text in Illustration
*1 Protective Tape


Hide 89745C 3.REMOVE TRANSMITTER BATTERY

a.
B317348

Detach the 7 claws and remove the transmitter battery cover.


b.
B317349

Remove the battery (lithium battery: CR2016).

NOTICE:
·

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module from being damaged.

·

Do not push the terminals with your finger.

·

Do not forcibly pry up the transmitter battery. The terminals may be damaged.

·

Do not touch the transmitter battery with wet hands. Water may cause rust.

·

Do not touch or move any components inside the transmitter. It may interfere with proper operation.




Hide 89745C 4.INSTALL TRANSMITTER BATTERY

a.
B317350

Install a new transmitter battery (lithium battery: CR2016) with the positive (+) side facing upward as shown in the illustration.

NOTICE:
·

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

·

Be careful not to bend the transmitter battery electrode during insertion.

·

Keep the transmitter battery cover interior free of dust and oil.




b.
B317348

Attach the 7 claws and install the transmitter battery cover.


Hide 89071B 5.INSTALL DOOR CONTROL TRANSMITTER MODULE

a.
B317347

Install the door control transmitter module into the transmitter housing case.


Hide 89751A 6.INSTALL TRANSMITTER HOUSING COVER

a.
B279141

Install the transmitter housing cover to the transmitter housing case.


b.

Check that the transmitter LED illuminates 3 times when a switch is pressed 3 times.