Home › Vehicle Interior › DOOR LOCK › DOOR CONTROL TRANSMITTER(w/o Entry and Start System) › 2014.08–2015.08
RM2660E _58 Vehicle Interior _052838 DOOR LOCK _0255557 DOOR CONTROL TRANSMITTER(w/o Entry and Start System) A

DOOR LOCK  DOOR CONTROL TRANSMITTER(w/o Entry and Start System)  INSTALLATION  


CAUTION / NOTICE / HINT

NOTICE:

Take extra care when handling these precision electronic components.


PROCEDURE

Hide 89745C 1.INSTALL TRANSMITTER BATTERY

a.
B102768

Install the battery (lithium battery: CR2016) with the positive (+) side facing upward as shown in the illustration.

NOTICE:
·

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.

·

Be careful not to bend the transmitter battery electrode during insertion.

·

Keep the transmitter cover interior free of dust and oil.




b.
B137137

Install the transmitter battery cover.

NOTICE:

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.



Hide 89071B 2.INSTALL DOOR CONTROL TRANSMITTER MODULE

a.
B137125

Install the door control transmitter module.

NOTICE:

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.



Hide 89751A 3.INSTALL TRANSMITTER HOUSING COVER

a.
B225783

Install the transmitter housing cover to the transmitter housing case.


b.

Check that the transmitter LED illuminates 3 times when a switch is pressed 3 times.