Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENGINE HOOD COURTESY SWITCH › from 2015.08
RM2660E _58 Vehicle Interior _052839 THEFT DETERRENT / KEYLESS ENTRY _0255569 ENGINE HOOD COURTESY SWITCH G

THEFT DETERRENT / KEYLESS ENTRY  ENGINE HOOD COURTESY SWITCH  INSPECTION  


PROCEDURE

Hide 53510 1.INSPECT HOOD LOCK ASSEMBLY (ENGINE HOOD COURTESY SWITCH) (for LHD)

a.

Measure the resistance according to the value(s) in the table below.

E336786E01
4.628,0.255 7.160,0.585 2.531,0.330 10 Component without harness connected: (Hood Lock Assembly) 0.627,2.199 1.799,2.348 1.172,0.149 10 Unlock Position 3.27,2.199 4.443,2.348 1.172,0.149 10 Lock Position

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Unlock 10 kΩ or higher
1 - 2 Lock Below 1 Ω


If the result is not as specified, replace the hood lock assembly.


Hide 53510 2.INSPECT HOOD LOCK ASSEMBLY (ENGINE HOOD COURTESY SWITCH) (for RHD)

a.

Measure the resistance according to the value(s) in the table below.

E339802E01
4.615,0.164 7.146,0.494 2.531,0.330 10 Component without harness connected: (Hood Lock Assembly) 1.048,2.289 2.220,2.438 1.172,0.149 10 Unlock Position 3.691,2.289 4.863,2.438 1.172,0.149 10 Lock Position

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Unlock 10 kΩ or higher
1 - 2 Lock Below 1 Ω


If the result is not as specified, replace the hood lock assembly.