This DTC is stored when the submersion circuit monitor inside the main body ECU detects that the vehicle has been submerged in water.
| DTC Code | Detection Condition | Trouble Area |
|---|---|---|
| B2277 | The submersion circuit monitor inside the main body ECU detects that the vehicle is submerged in water. | Main body ECU |
Before commencing troubleshooting, check if the main body ECU is wet. If it is, replace the main body ECU.
Check whether DTC B2277 is output 30 seconds or more after the engine switch is turned on (IG).
No DTC is output.
OK
(See pageGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING)
NG