Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENTRY AND START SYSTEM(for Entry Function) › 2014.08–2015.08
RM2660E _58 Vehicle Interior _052839 THEFT DETERRENT / KEYLESS ENTRY _0255572 ENTRY AND START SYSTEM(for Entry Function) D

THEFT DETERRENT / KEYLESS ENTRY  ENTRY AND START SYSTEM(for Entry Function)  CUSTOMIZE PARAMETERS  


CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER


HINT:

The following items can be customized.


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current setting before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



a.

Connect the intelligent tester to the DLC3.


b.

Turn the engine switch on (IG).


c.

Turn the intelligent tester on.


d.

Enter the following menus: Customize Setting.


e.

Select the setting by referring to the table below.

Entry & Start
Display Default Contents Setting
Ignition Area
(Entry ignition available area)
ALL Function to choose the available area for the key to start the engine and cancel the steering lock. FRONT/ALL*
Park Wait Time (Waiting time to permit unlocking door after locking) 2.5s Function that sets the waiting time to permit unlocking the door after the door is locked with the entry lock function. 0.5s/1.5s/2.5s/5s
Back Door Opening Operation (Back door open mode when vehicle is locked) LONG Back door opening the operation. LONG/TWICE/OFF

Warning
Display Default Contents Setting
Passenger Take Key ON Warn a key is taken out by fellow passengers ON/OFF
Key Low Battery Warning (Warn when key battery becomes weak) ON Function that warns the driver that the key battery power is low. ON/OFF
Key Out Range Warning ON Warn Starting E/G when the key is out of range ON/OFF

HINT:

*: "FRONT" means front, and "ALL" means front, rear 1 and rear 2.


PSD & PBD Operation (w/ Power Back Door System)
Display Default Contents Setting
Wireless PBD Operation 0.8 s
(1Motion)*
Function that operates power back door when door control transmitter is pressed in specified way (1-press, 2-presses, 0.8 sec.- press or off).
(Function to turn on/off the power back door wireless one motion open operation.)*
1 Oper or 2 Oper or 0.8 s or OFF
(1Motion or 1 Oper or 2 Oper or 0.8 s or OFF)*

HINT:

*: Except Europe




CUSTOMIZING FUNCTION WITH MULTI-DISPLAY (w/ Multi-display)


HINT:

The following items can be customized.


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current setting before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



a.

Turn the engine switch on (IG).


b.

Enter the following menus: Setup / Vehicle / Vehicle Settings / Vehicle Customization / Door Lock Settings.


c.

Select the setting by referring to the table below.

Door lock settings
Display Default Contents Setting
Select Doors to Unlock All Doors Function that sets which doors are unlocked by the entry unlock function. All Doors or Driver's Door
Entry and start system ON Function that enables or disables the entry and start system. On or Off



ENTRY UNLOCK MODE SWITCHING FUNCTION


a.

To use the entry unlock mode switching function, make sure the engine switch is off and simultaneously press and hold the lock switch on the key and another key switch for 5 seconds.

When the switches are pressed and held for 5 seconds, the entry door unlock mode changes in the following order: all door unlock mode, driver door unlock mode.


NOTICE:

After pressing and holding the switches for 5 seconds, wait 5 seconds before performing the same procedure again.


·

All door unlock mode (default):

When a touch sensor is touched, all doors unlock.

·

Driver door unlock mode:

When the driver door touch sensor is touched, only the driver door unlocks. When another touch sensor is touched, all doors unlock.



b.

The certification ECU (smart key ECU assembly) receives this signal from the door control receiver and changes the entry and start system to the entry unlock mode.


c.
B311425E01
0.176,2.592 2.423,2.753 2.247,0.160 12 w/o Multi-information Display: 0.075,0.145 2.191,0.305 2.116,0.160 12 w/ Multi-information Display: 0.917,2.133 2.481,2.282 1.564,0.149 10 Multi-information Display 1.805,2.133 1.805,1.606 false

The certification ECU (smart key ECU assembly) sounds the wireless door lock buzzer and combination meter buzzer to inform the user that the mode has been switched.

HINT:

The function only changes the entry unlock mode of the entry and start system. It does not switch the unlocking of the wireless door lock control.


·

All door unlock mode:

B311426E01
1.848,0.156 2.265,0.361 0.417,0.205 10 Mode 0.202,0.599 2.056,0.781 1.854,0.182 10 Wireless Door Lock Buzzer*1 0.202,2.244 1.023,2.593 0.821,0.349 10 Combination Meter 1.144,2.244 2.225,2.625 1.081,0.380 10 Multi-information Display*2 2.35,0.156 3.540,0.353 1.190,0.197 10 All Doors (Default) 2.551,1.138 2.798,1.304 0.248,0.165 10 ON 2.476,1.455 2.798,1.627 0.321,0.172 10 OFF 2.35,2.82 3.888,3.015 1.537,0.195 10 Displayed for 4 seconds 2.35,3.259 3.207,3.442 0.857,0.184 10 Sounds once 1.144,3.259 1.667,3.435 0.523,0.177 10 Buzzer 2.892,1.617 3.897,1.789 1.004,0.172 10 Sounds 2 times

HINT:
·

*1: except China.

·

*2: For vehicles with the multi-information display.



·

Driver door unlock mode:

B311427E02
1.833,0.188 2.25,0.396 0.417,0.208 10 false Mode 0.167,0.656 2.073,0.885 1.906,0.229 10 false Wireless Door Lock Buzzer*1 0.177,2.302 1,2.854 0.823,0.552 10 false Combination Meter 1.125,2.302 2.208,2.677 1.083,0.375 10 false Multi-information Display*2 2.333,0.177 3.948,0.594 1.615,0.417 10 false Driver Door (Customized) 2.365,1.219 2.677,1.427 0.313,0.208 10 false ON 2.344,1.51 2.729,1.719 0.385,0.208 10 false OFF 2.323,2.865 3.844,3.229 1.521,0.365 10 false Displayed for 4 seconds 2.313,3.26 3.667,3.625 1.354,0.365 10 false Sounds once 1.125,3.25 1.646,3.458 0.521,0.208 10 false Buzzer 3.885,1.594 5.094,1.802 1.208,0.208 10 false Sounds 3 times 2.344,0.635 5.5,0.969 3.156,0.333 10 false Each interval approximately 0.13 seconds 2.948,1.76 3.573,2 0.625,0.24 10 false 1 second

HINT:
·

*1: except China.

·

*2: For vehicles with the multi-information display.

·

The above illustration is for LHD vehicles. For RHD vehicles, the left side and right side are reversed.






KEY CANCEL


The key cancel operation disables the following functions:

·

Entry Unlock/Lock

·

Key Lock-in Prevention

·

Memory Call

·

Entry Back Door Open

·

Warning

·

Entry Ignition


a.

The operation procedures are as follows:

Precondition:

Engine switch off, driver side door closed and unlocked.

i.

Unlock the driver side door once with the unlock switch of the key.


ii.

Open the driver door within 5 seconds.


iii.

Unlock the driver side door twice with the unlock switch of the key within 5 seconds.


iv.

Perform close → open twice for the driver door within 30 seconds.

(Driver door: Open condition → Close → Open → Close → Open)


v.

Unlock the driver side door twice with the unlock switch of the key within 5 seconds.


vi.

Perform close → open once for the driver door within 30 seconds.

(Driver door: Open condition → Close → Open)


vii.

Close the driver door within 5 seconds.

When key cancel is activated, the wireless door lock buzzer sounds twice.

To return to the original condition, perform the procedures again. When the original condition is returned, the wireless door lock buzzer sounds once.