Home › Vehicle Interior › LIGHTING (INT) › ROOM LIGHT(for Center) › from 2015.08
RM2660E _58 Vehicle Interior _052840 LIGHTING (INT) _0255580 ROOM LIGHT(for Center) G

LIGHTING (INT)  ROOM LIGHT(for Center)  INSPECTION  


PROCEDURE

Hide 81240 1.INSPECT NO. 1 ROOM LIGHT ASSEMBLY (for LED Type)

a.

w/ Spot Light:

i.
U166476E02
2.083,1.25 2.656,1.177 false 1.635,1.177 1.458,0.542 false 0.135,0 0.323,0.177 0.188,0.177 10 false *a 1.375,0.365 1.625,0.646 0.25,0.281 10 false B 2.688,1.073 2.938,1.354 0.25,0.281 10 false E

Apply battery voltage to the connector and check the light illumination condition.

OK:
Measurement Condition Condition Specified Condition
Battery positive (+) → 3 (B)
Battery negative (-) → 1 (E)
Spot light switch RH on Illuminates (RH side)
Spot light switch LH on Illuminates (LH side)


If the result is not as specified, replace the No. 1 room light assembly.

Text in Illustration
*a Component without harness connected
(No. 1 Room Light Assembly)



b.

w/o Spot Light:

i.
U156737E01
0.14,0.074 0.332,0.253 0.192,0.179 10 *a 1.016,0.284 1.338,0.541 0.321,0.257 10 DB 2.128,0.267 2.449,0.523 0.321,0.257 10 DL 1.881,1.193 2.202,0.467 false 1.492,1.224 1.171,0.499 false

Apply battery voltage to the connector and check the light illumination condition.

OK:
Measurement Condition Condition Specified Condition
Battery positive (+) → 2 (DL)
Battery negative (-) → 4 (DB)
Room light switch on Room light illuminates


If the result is not as specified, replace the No. 1 room light assembly.

Text in Illustration
*a Component without harness connected
(No. 1 Room Light Assembly)