Home › Vehicle Interior › LIGHTING (INT) › ROOM LIGHT(for Rear) › from 2015.08
RM2660E _58 Vehicle Interior _052840 LIGHTING (INT) _0255581 ROOM LIGHT(for Rear) G

LIGHTING (INT)  ROOM LIGHT(for Rear)  INSPECTION  


PROCEDURE

Hide 81290 1.INSPECT NO. 3 ROOM LIGHT ASSEMBLY (for LED Type)

a.

Inspect the room light.

i.
U156737E01
0.14,0.074 0.332,0.253 0.192,0.179 10 *a 1.016,0.284 1.338,0.541 0.321,0.257 10 DB 2.128,0.267 2.449,0.523 0.321,0.257 10 DL 1.881,1.193 2.202,0.467 false 1.492,1.224 1.171,0.499 false

Apply battery voltage to the connector and check the light illumination condition.

OK:
Measurement Condition Condition Specified Condition
Battery positive (+) → 2 (DL)
Battery negative (-) → 4 (DB)
Room light switch on Room light illuminates


If the result is not as specified, replace the No. 3 room light assembly.

Text in Illustration
*a Component without harness connected
(No. 3 Room Light Assembly)



b.

Inspect the room light (for Door-linked).

i.
U156738E01
0.14,0.074 0.332,0.253 0.192,0.179 10 *a 1.016,0.284 1.338,0.541 0.321,0.257 10 DB 2.007,0.267 2.329,0.523 0.321,0.257 10 L 1.71,1.193 2.03,0.467 false 1.492,1.224 1.171,0.499 false

Apply battery voltage to the connector and check the light illumination condition.

OK:
Measurement Condition Condition Specified Condition
Battery positive (+) → 4 (DB))
Battery negative (-) → 3 (L)
Room light switch on Room light illuminates


If the result is not as specified, replace the No. 3 room light assembly.

Text in Illustration
*a Component without harness connected
(No. 3 Room Light Assembly)