Home › Vehicle Interior › LIGHTING (INT) › GLOVE BOX LIGHT › from 2015.08
RM2660E _58 Vehicle Interior _052840 LIGHTING (INT) _0255584 GLOVE BOX LIGHT G

LIGHTING (INT)  GLOVE BOX LIGHT  INSPECTION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 81260 1.INSPECT GLOVE BOX LIGHT ASSEMBLY

U156710E01
1.906,1.125 2.583,1.01 true 1.51,1.115 0.833,1.01 true 0.156,0.042 0.344,0.219 0.188,0.177 10 false *a 0.688,0.906 0.875,1.104 0.188,0.198 10 false B 2.646,0.896 2.833,1.094 0.188,0.198 10 false L

a.

Apply battery voltage to the connector and check the light illumination condition.

OK:
Measurement Condition Specified Condition
Battery positive (+) → 2 (B)
Battery negative(-) → 1 (L)
Illuminates


If the result is not as specified, replace the glove box light assembly.

Text in Illustration
*a Component without harness connected
(Glove Box Light Assembly)