Home › Vehicle Interior › LIGHTING (INT) › VANITY LIGHT › 2014.08–2015.08
RM2660E _58 Vehicle Interior _052840 LIGHTING (INT) _0255585 VANITY LIGHT G

LIGHTING (INT)  VANITY LIGHT  INSPECTION  


PROCEDURE

Hide 74310 1.INSPECT VISOR ASSEMBLY RH

a.
E144193E03
0.089,0.063 2.731,0.372 2.642,0.309 10 Component without harness connected: (Visor Assembly) 0.186,1.358 0.541,1.602 0.355,0.244 10 GND 2.873,1.306 3.247,1.643 0.373,0.336 10 SW 2.549,1.747 2.847,1.467 false 0.891,1.747 0.593,1.467 false

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 (SW) - 1 (GND) Visor raised 10 kΩ or higher
2 (SW) - 1 (GND) Visor lowered and mirror cover closed 10 kΩ or higher
2 (SW) - 1 (GND) Visor lowered and mirror cover open Below 1 Ω


If the result is not as specified, there may be a malfunction in the visor assembly.


Hide 74330C 2.INSPECT VISOR ASSEMBLY LH

a.
E144193E03
0.089,0.063 2.731,0.372 2.642,0.309 10 Component without harness connected: (Visor Assembly) 0.186,1.358 0.541,1.602 0.355,0.244 10 GND 2.873,1.306 3.247,1.643 0.373,0.336 10 SW 2.549,1.747 2.847,1.467 false 0.891,1.747 0.593,1.467 false

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 (SW) - 1 (GND) Visor raised 10 kΩ or higher
2 (SW) - 1 (GND) Visor lowered and mirror cover closed 10 kΩ or higher
2 (SW) - 1 (GND) Visor lowered and mirror cover open Below 1 Ω


If the result is not as specified, there may be a malfunction in the visor assembly.