Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM › 2014.08–2015.08
RM2660E _58 Vehicle Interior _052841 METER / GAUGE / DISPLAY _0255598 METER / GAUGE SYSTEM C

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  U0100  Lost Communication with ECM / PCM "A"  


DESCRIPTION

The combination meter communicates with the ECM via the CAN line.

DTC Code DTC Detection Condition Trouble Area
U0100 When the vehicle speed is 5 km/h (3 mph) or more and IG voltage is 10.5 V or more while no communication with the ECM continues for 3 seconds or more (no communication with the ECM or skid control ECU continues for 60 seconds or more). CAN communication system

WIRING DIAGRAM

E349719E01
1.635,3.083 2.094,3.281 0.458,0.198 10 false ECM 3.281,2.073 4.094,2.302 0.813,0.229 10 false CAN Line 4.438,3.094 6.531,3.344 2.094,0.25 10 false Combination Meter Assembly

PROCEDURE

1.CHECK FOR DTC
a.

Check for DTCs and note any codes that are output (See page Vehicle Interior>METER / GAUGE / DISPLAY>METER / GAUGE SYSTEM>DTC CHECK / CLEAR).



c.

Recheck for DTCs (See page Vehicle Interior>METER / GAUGE / DISPLAY>METER / GAUGE SYSTEM>DTC CHECK / CLEAR).

Result
Result Proceed to
CAN communication system DTC is not output A
CAN communication system (for LHD) DTC is output B
CAN communication system (for RHD) DTC is output C

HINT:

If CAN communication system DTC U0100 and another DTC are output at the same time, perform troubleshooting for CAN communication system DTC U0100 first.




A

B

C