Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM › from 2015.08
RM2660E _58 Vehicle Interior _052841 METER / GAUGE / DISPLAY _0255598 METER / GAUGE SYSTEM C

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  U0100  Lost Communication with ECM / PCM "A"  U0129  Lost Communication with Brake System Control Module  U0130  Lost Communication with VGRS  U0142  Lost Communication with Main Body ECU  U0151  Lost Communication with SRS Airbag ECU  U0163  Last Communication With Navigation ECU  U0182  Lost Communication with AFS ECU  U023A  Lost Communication with Front Camera Module  U1104  Lost Communication with Driving Support ECU  


DESCRIPTION

DTC Code DTC Detection Condition Trouble Area
U0100
·

IG voltage is 9.5 V to 11.5 V.

·

No communication with the ECM continues for 2 seconds or more.


·

ECM

·

CAN communication system

·

Combination meter assembly


U0129
·

IG voltage is 9.5 V to 11.5 V.

·

No communication with the hydraulic brake booster (skid control ECU) continues for 2 seconds or more.


·

Hydraulic brake booster (skid control ECU)

·

CAN communication system

·

Combination meter assembly


U0130
·

IG voltage is 9.5 V to 11.5 V.

·

No communication with the power steering control ECU continues for 3 seconds or more.


·

Power steering control ECU

·

CAN communication system

·

Combination meter assembly


U0142
·

IG voltage is 9.5 V to 11.5 V.

·

No communication with the main body ECU (multiplex network body ECU) continues for 3 seconds or more.


·

Main body ECU (multiplex network body ECU)

·

CAN communication system

·

Combination meter assembly


U0151
·

IG voltage is 9.5 V to 11.5 V.

·

No communication with the airbag ECU continues for 10 seconds or more.


·

Airbag ECU

·

CAN communication system

·

Combination meter assembly


U0163
·

IG voltage is 9.5 V to 11.5 V.

·

No communication with the multi-media module receiver assembly continues for 3 seconds or more.


·

Multi-media module receiver assembly

·

CAN communication system

·

Combination meter assembly


U0182
·

IG voltage is 9.5 V to 11.5 V.

·

No communication with the headlight swivel ECU assembly continues for 10 seconds or more.


·

Headlight swivel ECU assembly

·

CAN communication system

·

Combination meter assembly


U023A
·

IG voltage is 9.5 V to 11.5 V.

·

No communication with the forward recognition camera continues for 10 seconds or more.


·

Forward recognition camera

·

CAN communication system

·

Combination meter assembly


U1104
·

IG voltage is 9.5 V to 11.5 V.

·

No communication with the driving support ECU continues for 10 seconds or more.


·

Driving support ECU

·

CAN communication system

·

Combination meter assembly



PROCEDURE

1.CHECK FOR DTC
a.

Check for DTCs. (See page Vehicle Interior>METER / GAUGE / DISPLAY>METER / GAUGE SYSTEM>DTC CHECK / CLEAR).

Result
Result Proceed to
CAN communication system DTC is not output A
CAN communication system (for LHD with Central Gateway ECU) DTC is output B
CAN communication system (for LHD without Central Gateway ECU) DTC is output C
CAN communication system (for RHD with Central gateway ECU) DTC is output D
CAN communication system (for RHD without Central gateway ECU) DTC is output E

OK:

No DTCs are output.




A

B

C

D

E