Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM › 2014.08–2015.08
RM2660E _58 Vehicle Interior _052841 METER / GAUGE / DISPLAY _0255598 METER / GAUGE SYSTEM C

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  U0129  Lost Communication with Brake System Control Module  


DESCRIPTION

The combination meter communicates with the skid control ECU via the CAN line.

DTC Code DTC Detection Condition Trouble Area
U0129 When 15 seconds have elapsed after the engine is started and IG voltage is 10.5 V or more while no communication with the skid control ECU continues for 3 seconds or more (no communication with the ECM or skid control ECU continues for 60 seconds or more). CAN communication system

WIRING DIAGRAM

E349719E06
1.271,3.083 2.844,3.365 1.573,0.281 10 false Skid Control ECU 3.281,2.073 4.094,2.302 0.813,0.229 10 false CAN Line 4.438,3.094 6.531,3.344 2.094,0.25 10 false Combination Meter Assembly

PROCEDURE

1.CHECK FOR DTC
a.

Check for DTCs and note any codes that are output (See page Vehicle Interior>METER / GAUGE / DISPLAY>METER / GAUGE SYSTEM>DTC CHECK / CLEAR).



c.

Recheck for DTCs (See page Vehicle Interior>METER / GAUGE / DISPLAY>METER / GAUGE SYSTEM>DTC CHECK / CLEAR).

Result
Result Proceed to
CAN communication system DTC is not output A
CAN communication system (for LHD) DTC is output B
CAN communication system (for RHD) DTC is output C

HINT:

If CAN communication system DTC U0129 and another DTC are output at the same time, perform troubleshooting for CAN communication system DTC U0129 first.




A

B

C