Home › Vehicle Interior › MIRROR (INT) › INNER REAR VIEW MIRROR › 2014.08–2015.08
RM2660E _58 Vehicle Interior _052842 MIRROR (INT) _0255600 INNER REAR VIEW MIRROR G

MIRROR (INT)  INNER REAR VIEW MIRROR  INSPECTION  


PROCEDURE

Hide 87810 1.INSPECT INNER REAR VIEW MIRROR ASSEMBLY (w/o Automatic High Beam System)

a.

Check operation of the electrochromic inner mirror.

E285996E01
0.745,2.223 0.966,2.389 0.221,0.165 10 *1 2.278,0.27 2.749,0.584 0.471,0.313 10 *a 3.868,0.755 4.056,0.901 0.188,0.147 10 IG 3.499,0.277 3.625,0.426 0.126,0.149 10 E 3.501,0.824 3.859,0.824 false 3.365,0.769 3.365,0.344 3.365,0.344 3.489,0.344 false 0.811,1.821 0.811,2.2 false

Text in Illustration
*1 Black Colored Tape - -
*a Component without harness connected
Inner Rear View Mirror Assembly
- -

i.

Connect the battery positive (+) lead to terminal 1(IG) and the negative (-) lead to terminal 2(E).


ii.

Attach black colored tape to the forward sensor to prevent it from sensing.


iii.

Shine an electric light on the mirror. Check that the mirror surface changes from bright to dark.

HINT:

When the environment is very bright, the antiglare operation may occur immediately after the tape is applied. If the result is not as specified, replace the inner rear view mirror assembly.




Hide 87810 2.INSPECT INNER REAR VIEW MIRROR ASSEMBLY (w/ Automatic High Beam System)

a.

Check operation of the electrochromic inner mirror.

E285997E01
0.625,1.895 0.625,2.283 false 0.56,2.302 0.716,2.453 0.156,0.151 10 *1 2.246,0.263 2.471,0.433 0.225,0.170 10 *a 3.465,0.263 3.584,0.408 0.119,0.144 10 E 3.894,0.768 4.069,0.914 0.174,0.147 10 IG 3.504,0.836 3.876,0.836 false 3.364,0.775 3.364,0.329 3.364,0.329 3.448,0.329 false

Text in Illustration
*1 Black Colored Tape - -
*a Component without harness connected
Inner Rear View Mirror Assembly
- -

i.

Connect the battery positive (+) lead to terminal 1(IG) and the negative (-) lead to terminal 2(E).


ii.

Attach black colored tape to the forward sensor to prevent it from sensing.


iii.

Shine an electric light on the mirror. Check that the mirror surface changes from bright to dark.

HINT:

When the environment is very bright, the antiglare operation may occur immediately after the tape is applied. If the result is not as specified, replace the inner rear view mirror assembly.