Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › AIRBAG SYSTEM
RM2660E _58 Vehicle Interior _052843 SUPPLEMENTAL RESTRAINT SYSTEMS _0255601 AIRBAG SYSTEM D

SUPPLEMENTAL RESTRAINT SYSTEMS  AIRBAG SYSTEM  CHECK MODE PROCEDURE  


NOTICE:

Enter "Signal Check" from the "DTC CHECK" screen displayed on the intelligent tester to clear the output DTCs (both present and past).


HINT:
·

DTCs can be stored more sensitively in check mode than in normal diagnosis mode.

·

Perform the check mode inspection when a malfunction in each squib circuit is suspected even after the normal system code is output through normal diagnosis mode inspection.



CHECK MODE PROCEDURE (for Using an Intelligent Tester)


a.

Turn the ignition switch off.


b.

Connect the intelligent tester to the DLC3.


c.

Turn the ignition switch to ON.


d.

Turn the intelligent tester on.


e.

Enter the following menus: Body / SRS Airbag / Utility / Signal Check / *.

HINT:

*: Follow the directions on the tester screen.