Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › KNEE AIRBAG ASSEMBLY(for Driver Side) › 2014.08–2015.08
RM2660E _58 Vehicle Interior _052843 SUPPLEMENTAL RESTRAINT SYSTEMS _0255606 KNEE AIRBAG ASSEMBLY(for Driver Side) G

SUPPLEMENTAL RESTRAINT SYSTEMS  KNEE AIRBAG ASSEMBLY(for Driver Side)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 73900 1.CHECK DRIVER SIDE KNEE AIRBAG ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)


b.

With the driver side knee airbag installed on the vehicle, perform a visual check. If there are any defects as mentioned below, replace the driver side knee airbag with a new one:

Cuts, minute cracks or marked discoloration on the driver side knee airbag.


Hide 73900 2.CHECK DRIVER SIDE KNEE AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)


b.

With the driver side knee airbag removed from the vehicle, perform a visual check. If there are any defects as mentioned below, replace the driver side knee airbag with a new one:

·

Cuts, minute cracks or marked discoloration on the driver side knee airbag.

·

Cracks or other damage to the connector.

·

Deformation or cracks on the instrument panel reinforcement.


NOTICE:

For removal and installation procedures of the driver side knee airbag, be sure to follow the correct procedure.