Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › REAR FLOOR AIRBAG SENSOR › from 2015.08
RM2660E _58 Vehicle Interior _052843 SUPPLEMENTAL RESTRAINT SYSTEMS _0255615 REAR FLOOR AIRBAG SENSOR G

SUPPLEMENTAL RESTRAINT SYSTEMS  REAR FLOOR AIRBAG SENSOR  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.CHECK REAR FLOOR AIRBAG SENSOR (VEHICLE NOT INVOLVED IN COLLISION)

Hide 2.CHECK REAR FLOOR AIRBAG SENSOR (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)


b.

When airbags have deployed as the result of a collision, be certain to replace the rear floor airbag sensor when it is in the damaged area (anywhere in need of repair). Furthermore, it is also necessary to replace the rear floor airbag sensor in an undamaged area that has registered a major collision, or which exhibits any of the following abnormalities:

·

Cracks, dents or chips on the sensor housing.

·

Cracks or other damage to the connector.

·

Peeling off of the label or damage to the serial number.


CAUTION:

For removal and installation procedures of the rear floor airbag sensor, be sure to follow the correct procedure.



Hide 3.CHECK REAR FLOOR AIRBAG SENSOR (VEHICLE INVOLVED IN COLLISION AND AIRBAG IS DEPLOYED)

a.

When airbags have deployed as the result of a collision, be certain to replace the rear floor airbag sensor in the damaged area (anywhere in need of repair). Furthermore, it is also necessary to replace the rear floor airbag sensor in a undamaged area that has registered a major collision, or which exhibits any of the following abnormalities:

·

Cracks, dents or chips on the sensor housing.

·

Cracks or other damage to the connector.

·

Peeling off of the label or damage to the serial number.


CAUTION:

For removal and installation procedures of the rear floor airbag sensor, be sure to follow the correct procedure.