Home › Vehicle Interior › SEAT › SEAT HEATER SYSTEM › from 2015.08
RM2660E _58 Vehicle Interior _052845 SEAT _0255627 SEAT HEATER SYSTEM U

SEAT  SEAT HEATER SYSTEM  DATA LIST / ACTIVE TEST  


DATA LIST


HINT:

Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.


NOTICE:

In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


a.

Connect the GTS to the DLC3.


b.

Turn the engine switch on (IG).


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Air Conditioner / Data List.


e.

Read the Data List according to the display on the GTS.

Air Conditioner
Tester Display Measurement Item/Range Normal Condition Diagnostic Note
FR Seat Heater Temperature Front seat RH side seat heater temperature / min: -29.7 °C or max: 59.55 °C Within range from 36 to 43 °C (96 to 109 °F) Front seat heater is on
FL Seat Heater Temperature Front seat LH side seat heater temperature / min: -29.7 °C or max: 59.55 °C Within range from 36 to 43 °C (96 to 109 °F) Front seat heater is on
Number of Trouble Codes Number of trouble codes / min: 0 or max: 255 Number of DTCs will be displayed -