Home › Vehicle Interior › SEAT › REAR NO. 2 SEAT ASSEMBLY(except Face to Face Seat Type)
RM2660E _58 Vehicle Interior _052845 SEAT _0255630 REAR NO. 2 SEAT ASSEMBLY(except Face to Face Seat Type) N

SEAT  REAR NO. 2 SEAT ASSEMBLY(except Face to Face Seat Type)  DISPOSAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedures for the LH side and RH side

·

The procedures listed below are for the LH side.



PROCEDURE

Hide 79029A 1.DISPOSE OF NO. 2 SEAT STAY SUB-ASSEMBLY

B188400E01
1.672,1.723 1.800,1.907 0.128,0.184 10 A 2.657,1.723 2.785,1.907 0.128,0.184 10 B 2.736,1.362 2.864,1.546 0.128,0.184 10 b 2.17,1.615 2.298,1.798 0.128,0.184 10 a

a.

Horizontally fix the seat stay in a vise with the piston-rod pulled out.


b.

Wear safety glasses. Gradually cut a part between A and B shown in the illustration using a metal saw and gradually release the gas.

Standard:
Area Specified Condition
a 80 mm (3.15 in.)
b 10 mm (0.394 in.)


CAUTION:

As metal debris may be blown outward by the gas, you must:

·

Wear protective glasses.

·

Cover the area being cut.



NOTICE:

The gas inside the seat stay is colorless, odorless and harmless. There is a possibility that metal debris could scatter, so cover the part with a piece of cloth or other material.