1.INSPECT SEAT MEMORY SWITCH
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| 4 (M1) - 6 (E) | 1 switch pressed | Below 1 Ω |
| 3 (M2) - 6 (E) | 2 switch pressed | |
| 2 (M3) - 6 (E) | 3 switch pressed | |
| 5 (MRY) - 6 (E) | SET switch pressed |
If the result is not as specified, replace the seat memory switch.