Home › Vehicle Interior › SEAT › LUMBAR SUPPORT ADJUSTER ASSEMBLY (for Power Seat) › 2014.08–2015.08
RM2660E _58 Vehicle Interior _052845 SEAT _0255635 LUMBAR SUPPORT ADJUSTER ASSEMBLY(for Power Seat) A

SEAT  LUMBAR SUPPORT ADJUSTER ASSEMBLY(for Power Seat)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 71200S 1.REMOVE FRONT SEAT ASSEMBLY LH

Hide 84921B 2.REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

Hide 84921A 3.REMOVE RECLINING POWER SEAT SWITCH KNOB

Hide 71812D 4.REMOVE FRONT SEAT CUSHION SHIELD LH

Hide 73240 5.REMOVE FRONT SEAT INNER BELT ASSEMBLY LH

Hide 71862 6.REMOVE FRONT INNER SEAT CUSHION SHIELD LH

Hide 71706 7.REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY LH

Hide 85865 8.REMOVE SEAT CLIMATE CONTROL CONTROLLER LH (w/ Climate Control Seat System)

Hide 10.REMOVE SEATBACK COVER WITH PAD

a.
B180706

w/o Climate Control Seat System:

Disconnect the connector and detach the 2 wire harness clamps.


b.
B299194

w/ Climate Control Seat System:

Disconnect the 2 connectors and detach the 4 wire harness clamps.


c.
B180713E02
1.643,3.124 1.810,3.269 0.166,0.145 10 *1 1.739,2.671 1.739,3.113 false 1.244,2.672 1.739,2.795 1.739,2.795 2.24,2.672 false

Remove the hog rings.

Text in Illustration
*1 Hog Ring


d.
B180716

Remove the nut and detach the seatback cover bracket.

Text in Illustration
*1 Seatback Cover Bracket


e.

Detach the hooks and remove the seatback cover with pad.


Hide 72760D 12.REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY LH

a.
B299472E01
2.803,0.991 2.963,1.140 0.159,0.149 10 *1 3.173,0.427 3.332,0.576 0.159,0.149 10 *2 1.835,0.991 1.835,1.069 1.835,1.069 2.783,1.069 false 2.375,0.51 3.167,0.51 false 2.123,1.794 3.087,1.794 3.087,1.794 3.087,0.51 false 0.105,0.422 0.264,0.571 0.159,0.149 10 *2 1.081,0.51 0.289,0.51 false 1.332,1.794 0.369,1.794 0.369,1.794 0.369,0.51 false

Remove the cable clamp and disconnect the active headrest cable from the seatback spring.

Text in Illustration
*1 Cable Clamp
*2 Hook


b.

Remove the 4 springs.


c.

Detach the 4 hooks and remove the seatback spring.


d.
B299473

Disconnect the connector.


e.

Remove the 2 screws and lumbar support adjuster assembly LH.