Home › Vehicle Interior › SEAT › REAR SEAT CUSHION HEATER(for 60/40 Split Seat Type 40 Side)
RM2660E _58 Vehicle Interior _052845 SEAT _0255643 REAR SEAT CUSHION HEATER(for 60/40 Split Seat Type 40 Side) G

SEAT  REAR SEAT CUSHION HEATER(for 60/40 Split Seat Type 40 Side)  INSPECTION  


PROCEDURE

Hide 87510Q 1.INSPECT REAR SEAT CUSHION HEATER ASSEMBLY

U155936E01
0.2,2.475 2.706,2.823 2.506,0.348 10 Component without harness connected: (Rear Seat Cushion Heater) 1.377,3.518 1.491,3.674 0.114,0.156 10 A 2.458,3.521 2.579,3.663 0.121,0.142 10 B 0.491,1.311 1.230,1.474 0.739,0.163 10 Thermostat 1.555,1.406 1.385,1.406 false 1.68,1.252 1.549,1.408 false

a.

Heat the thermostat with a light.


b.

Check the seat cushion heater.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
A-1 - B-1 Seat cushion heater temperature 25°C (77°F) 3.12 to 3.74 Ω
A-4 - B-2
A-1 - A-4
A-2 - A-3 9.9 to 10.1 kΩ


If the result is not as specified, replace the seat cushion heater assembly.