Home › Vehicle Interior › SEAT › CLIMATE CONTROL SEAT SYSTEM › 2014.08–2015.08
RM2660E _58 Vehicle Interior _052845 SEAT _0255650 CLIMATE CONTROL SEAT SYSTEM U

SEAT  CLIMATE CONTROL SEAT SYSTEM  TERMINALS OF ECU  


CHECK SEAT CLIMATE CONTROL ECU LH


U164250E02
3.469,0.375 3.76,0.583 0.292,0.208 10 false c35

a.

Disconnect the c35 seat climate control ECU LH connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
c35-12 (B) - Body ground G - Body ground Battery power supply Always 11 to 14 V
c35-13 (IG) - Body ground G - Body ground Ignition power supply Engine switch on (IG) 11 to 14 V
c35-15 (V5) - c35-6 (VS) B - G Front seat heater switch (LH side) signal Front seat heater switch (LH side) (blower on HI) Below 100 Ω
c35-15 (V5) - c35-17 (VG) B - BR Front seat heater switch (LH side) signal Always 4 to 6 kΩ
c35-3 (GND) -Body ground W-B - Body ground Ground Always Below 1 Ω


c.

Reconnect the c35 seat climate control ECU LH connector.


d.

Measure the voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
c35-15 (V5) - Body ground B - Body ground Front seat heater switch (LH side) power supply Engine switch on (IG) 4.7 to 5.2 V
c35-26 (IND) - Body ground L - Body ground Seat heater switch indicator light (LH side) illumination signal Engine switch on (IG), front LH blower fan operating (seat heater switch indicator light [LH side] illuminated) Below 1 V
Engine switch on (IG), front LH blower fan not operating (seat heater switch indicator light [LH side] not illuminated) 11 to 14 V
c35-24 (BCS) - c35-1 (BFC-) L - B Front climate control blower LH drive signal Engine switch on (IG), front seat heater switch (LH side) off Below 1 V
Engine switch on (IG), front seat heater switch (LH side) on (blower on HI) 12.6 to 13.4 V



CHECK SEAT CLIMATE CONTROL ECU RH


U164249E02
3.479,0.385 3.771,0.594 0.292,0.208 10 false c32

a.

Disconnect the c32 seat climate control ECU RH connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
c32-12 (B) - Body ground G - Body ground Battery power supply Always 11 to 14 V
c32-13 (IG) - Body ground G - Body ground Ignition power supply Engine switch on (IG) 11 to 14 V
c32-15 (V5) - c32-6 (VS) B - W Front seat heater switch (RH side) signal Front seat heater switch (RH side) (blower on HI) Below 100 Ω
c32-15 (V5) - c32-17 (VG) B - BR Front seat heater switch (RH side) signal Always 4 to 6 kΩ
c32-3 (GND) -Body ground W-B - Body ground Ground Always Below 1 Ω


c.

Reconnect the c32 seat climate control ECU RH connector.


d.

Measure the voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
c32-15 (V5) - Body ground B - Body ground Front seat heater switch (RH side) power supply Engine switch on (IG) 4.7 to 5.2 V
c32-26 (IND) - Body ground R - Body ground Seat heater switch indicator light (RH side) illumination signal Engine switch on (IG), front RH blower fan operating (seat heater switch indicator light [RH side] illuminated) Below 1 V
Engine switch on (IG), front RH blower fan not operating (seat heater switch indicator light [RH side] not illuminated) 11 to 14 V
c32-24 (BCS) - c32-1 (BFC-) L - B Front climate control blower RH drive signal Engine switch on (IG), front seat heater switch (RH side) off Below 1 V
Engine switch on (IG), front seat heater switch (RH side) on (blower on HI) 12.6 to 13.4 V