Home › Vehicle Interior › SEAT BELT › SEAT BELT WARNING SYSTEM › 2014.08–2015.08
RM2660E _58 Vehicle Interior _052846 SEAT BELT _0255651 SEAT BELT WARNING SYSTEM U

SEAT BELT  SEAT BELT WARNING SYSTEM  DATA LIST / ACTIVE TEST  


READ DATA LIST


NOTICE:

In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


HINT:

Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.


a.

Connect the intelligent tester to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the intelligent tester on.


d.

Enter the following menus: Body / (desired system) / Data List.


e.

According to the display on the intelligent tester, read the Data List.

Combination Meter
Tester Display Measurement Item/Range Normal Condition Diagnostic Note
P-Seatbelt Buckle SW*1 Front passenger side seat belt buckle signal / ON or OFF ON: Front passenger side seat is occupied, front passenger side seat belt is fastened
OFF: Front passenger side seat is occupied, front passenger side seat belt is unfastened
-
D - Seatbelt Warning Buzzer*2 Driver side seat belt warning signal / ON or OFF ON: Driver side seat belt warning buzzer is sound
OFF: Driver side seat belt warning buzzer is not sound
The current customize setting is displayed.
P - Seatbelt Warning Buzzer*1, *2 Front passenger side seat belt warning signal / ON or OFF ON: Front passenger side seat belt warning buzzer is sound
OFF: Front passenger side seat belt warning buzzer is not sound
The current customize setting is displayed.

*1: w/ Airbag System

*2: w/ Seat Belt Warning Buzzer


SRS Airbag (w/ Airbag System)
Tester Display Measurement Item/Range Normal Condition Diagnostic Note
Driver Buckle SW Driver side seat belt / Set, Unset or NG Set: Driver side seat belt is fastened
Unset: Driver side seat belt is unfastened
NG: Data is not determined
Passenger Buckle SW Front passenger side seat belt / Set, Unset or NG ON: Front passenger side seat is occupied, front passenger side seat belt is fastened
OFF: Front passenger side seat is occupied, front passenger side seat belt is unfastened
-

Main Body (w/o Airbag System)
Tester Display Measurement Item/Range Normal Condition Diagnostic Note
D Seat Buckle SW Driver side seat belt / ON or OFF ON: Driver side seat belt is fastened
OFF: Driver side seat belt is unfastened
-



PERFORM ACTIVE TEST


HINT:

Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


a.

Connect the intelligent tester to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the intelligent tester on.


d.

Enter the following menus: Body / Combination Meter / Active Test.


e.

According to display on the intelligent tester, perform the Active Test.

Combination Meter
Tester Display Test Part Control Range Diagnostic Note
Driver Side Seat Belt Driver side seat belt warning light ON/OFF Confirm that the vehicle is stopped and the engine is idling.
Front Passenger Side Seat Belt* Front passenger side seat belt warning light ON/OFF Confirm that the vehicle is stopped and the engine is idling.

*: w/ Airbag System