Home › Vehicle Interior › SEAT BELT › SEAT BELT WARNING SYSTEM › 2014.08–2015.08
RM2660E _58 Vehicle Interior _052846 SEAT BELT _0255651 SEAT BELT WARNING SYSTEM D

SEAT BELT  SEAT BELT WARNING SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZING FUNCTION WITH TECHSTREAM


HINT:

The following items can be customized.


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Record the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



a.

Customizing with the intelligent tester

i.

Connect the intelligent tester to the DLC3.


ii.

Turn the ignition switch to ON.


iii.

Turn the intelligent tester on.


iv.

Enter the following menus: Utility / Customize / Warning.


v.

Select the setting by referring to the table below.

Display Default Contents Setting Relevant ECU
D-Seatbelt Warning Buzzer*1 ON If driver side seat belt is unfastened and the vehicle is driven at approximately 20 km/h (12.5 mph) or more, this system sound the seat belt warning buzzer. ON or OFF Combination meter assembly
P-Seatbelt Warning Buzzer*1, *2 ON If front passenger side seat belt is unfastened with the front passenger seat occupied and the vehicle is driven at approximately 20 km/h (12.5 mph) or more, this system sound the seat belt warning buzzer. ON or OFF Combination meter assembly

*1: w/ Seat Belt Warning Buzzer

*2: w/ Airbag System