Home › Vehicle Interior › HEATING / AIR CONDITIONING › REAR AIR CONDITIONING UNIT (w/ Heater)
RM2660E _58 Vehicle Interior _052847 HEATING / AIR CONDITIONING _0255670 REAR AIR CONDITIONING UNIT(w/ Heater) A

HEATING / AIR CONDITIONING  REAR AIR CONDITIONING UNIT(w/ Heater)  DISASSEMBLY  


PROCEDURE

Hide 87217E 1.REMOVE REAR SIDE NO. 2 AIR DUCT

E154788

a.

Remove the 3 screws and duct.


Hide 87217F 2.REMOVE REAR SIDE NO. 3 AIR DUCT

E154789

a.

Remove the 2 screws and duct.


Hide 88539K 3.REMOVE DRAIN COOLER HOSE

E154791

a.

Remove the screw.


b.

Detach the claw and remove the drain hose.


Hide 87106W 4.REMOVE REAR AIR MIX DAMPER SERVO SUB-ASSEMBLY

E154792

a.

Disconnect the connector.


b.

Remove the 2 screws and damper servo.


Hide 87106X 5.REMOVE REAR MODE DAMPER SERVO SUB-ASSEMBLY

E161096

a.

Remove the 2 screws and plate cover.


b.
E154793

Disconnect the connector.


c.

Remove the 2 screws and damper servo.


Hide 87106V 6.REMOVE NO. 2 AIR MIX DAMPER SERVO SUB-ASSEMBLY

E154794

a.

Disconnect the connector.


b.

Remove the 2 screws and damper servo.


Hide 88710C 7.REMOVE AIR CONDITIONER ACCESSORY ASSEMBLY

E154795

a.

Remove the packing.


b.
E154335

Remove the bolt and 4 screws.


c.

Using pliers, grip the claws of the clips and slide the 2 clips.


d.

Remove the air conditioner accessory assembly.


e.

Remove the 2 O-rings from the air conditioner accessory assembly.


Hide 88515B 8.REMOVE REAR COOLING UNIT EXPANSION VALVE

E154796

a.

Disconnect the connector.


b.

Detach the clamp.


c.

Using a 4 mm hexagon wrench, remove the 2 hexagon bolts and expansion valve.


Hide 87107B 9.REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY

E154797

a.

Remove the screw and detach the claw.


b.

Remove the heater clamp.


c.
E154798

Remove the heater radiator.


Hide 87103D 10.REMOVE REAR BLOWER MOTOR

E154799

a.

Disconnect the connector.


b.

Remove the 3 screws and blower motor.


Hide 87165C 11.REMOVE BLOWER MOTOR CONTROLLER

E154812

a.

Disconnect the connector.


b.

Remove the 2 screws and blower motor controler.


Hide 88501R 12.REMOVE EVAPORATOR SUB-ASSEMBLY

E154800

a.

Remove the 12 screws and rear cooling unit case LH.


b.

Remove the evaporator.


c.
E131047

Remove the 2 O-rings from the evaporator.


Hide 82210K 13.REMOVE REAR EVAPORATOR TEMPERATURE SENSOR

E154801

a.

Detach the 2 claws and remove the sensor.


Hide 88605S 14.REMOVE WIRING AIR CONDITIONING HARNESS SUB-ASSEMBLY