Home › Vehicle Interior › HEATING / AIR CONDITIONING › REAR AIR CONDITIONING UNIT (w/o Heater) › 2014.08–2017.08
RM2660E _58 Vehicle Interior _052847 HEATING / AIR CONDITIONING _0255672 REAR AIR CONDITIONING UNIT(w/o Heater) A

HEATING / AIR CONDITIONING  REAR AIR CONDITIONING UNIT(w/o Heater)  DISASSEMBLY  


PROCEDURE

Hide 1.REMOVE COOLING UNIT BRACKET

E154872

a.

Remove the 2 screws and bracket.


Hide 87217F 2.REMOVE REAR SIDE NO. 3 AIR DUCT

E154873

a.

Remove the 2 screws and duct.


Hide 88539K 3.REMOVE DRAIN COOLER HOSE

E154791

a.

Remove the screw.


b.

Detach the claw and remove the drain hose.


Hide 88710C 4.REMOVE AIR CONDITIONER ACCESSORY ASSEMBLY

E154874

a.

Remove the packing.


b.
E154337

Remove the bolt and 2 screws.


c.

Remove the air conditioner accessory assembly.


d.

Remove the 2 O-rings from the air conditioner accessory assembly.


Hide 88515B 5.REMOVE REAR COOLING UNIT EXPANSION VALVE

E154877

a.

Disconnect the connector.


b.

Detach the clamp.


c.

Using a 4 mm hexagon wrench, remove the 2 hexagon bolts and expansion valve.


Hide 87138D 6.REMOVE BLOWER RESISTOR

E154878

a.

Disconnect the connector.


b.

Remove the 2 screws and blower resistor.


Hide 87103D 7.REMOVE REAR BLOWER MOTOR

E154879

a.

Disconnect the connector.


b.

Remove the 3 screws and blower motor.


Hide 88501R 8.REMOVE EVAPORATOR SUB-ASSEMBLY

E154880

a.

Remove the 12 screws and rear cooling unit case LH.


b.

Remove the evaporator.


c.
E131047

Remove the 2 O-rings from the evaporator.


Hide 88605S 9.REMOVE WIRING AIR CONDITIONING HARNESS SUB-ASSEMBLY