Home › Vehicle Interior › HEATING / AIR CONDITIONING › REAR AIR CONDITIONING UNIT (w/o Heater) › 2014.08–2017.08
RM2660E _58 Vehicle Interior _052847 HEATING / AIR CONDITIONING _0255672 REAR AIR CONDITIONING UNIT(w/o Heater) A

HEATING / AIR CONDITIONING  REAR AIR CONDITIONING UNIT(w/o Heater)  REASSEMBLY  


PROCEDURE

Hide 88605S 1.INSTALL WIRING AIR CONDITIONING HARNESS SUB-ASSEMBLY

Hide 88501R 2.INSTALL EVAPORATOR SUB-ASSEMBLY

E131047

a.

Sufficiently apply compressor oil to 2 new O-rings and the fitting surface of the hose joint.

Compressor oil:

ND-OIL 8 or equivalent



b.

Install the 2 O-rings to the evaporator.


c.

Install the evaporator.


d.
E154880

Install the rear cooling unit case LH with the 12 screws.


Hide 87103D 3.INSTALL REAR BLOWER MOTOR

E154879

a.

Install the blower motor with the 3 screws.


b.

Connect the connector.


Hide 87138D 4.INSTALL BLOWER RESISTOR

E154878

a.

Install the blower resistor with the 2 screws.


b.

Connect the connector.


Hide 88515B 5.INSTALL REAR COOLING UNIT EXPANSION VALVE

E154877

a.

Using a 4 mm hexagon wrench, install the expansion valve with the 2 hexagon bolts.

Torque:
3.5 N*m (36 kgf*cm, 31 in.*lbf)


b.

Attach the clamp.


c.

Connect the connector.


Hide 88710C 6.INSTALL AIR CONDITIONER ACCESSORY ASSEMBLY

E154337

a.

Sufficiently apply compressor oil to 2 new O-rings and the fitting surface of the hose joint.

Compressor oil:

ND-OIL 8 or equivalent



b.

Install the 2 O-rings to the air conditioner accessory assembly.


c.

Install the air conditioner accessory assembly.


d.

Install the bolt and 2 screws.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


e.
E154874

Install new packing as shown in the illustration.


Hide 88539K 7.INSTALL DRAIN COOLER HOSE

E154791

a.

Attach the claw to install the drain hose.


b.

Install the screw.


Hide 87217F 8.INSTALL REAR SIDE NO. 3 AIR DUCT

E154873

a.

Install the duct with the 2 screws.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


Hide 9.INSTALL COOLING UNIT BRACKET

E154872

a.

Install the bracket with the 2 screws.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)