87217E
1.REMOVE REAR SIDE NO. 2 AIR DUCT
Remove the 3 screws and duct.
87217F
2.REMOVE REAR SIDE NO. 3 AIR DUCT
Remove the 2 screws and duct.
88539K
3.REMOVE DRAIN COOLER HOSE
Remove the screw.
Detach the claw and remove the drain hose.
87106W
4.REMOVE REAR AIR MIX DAMPER SERVO SUB-ASSEMBLY
Disconnect the connector.
Remove the 2 screws and damper servo.
87106X
5.REMOVE REAR MODE DAMPER SERVO SUB-ASSEMBLY
Remove the 2 screws and plate cover.
Disconnect the connector.
Remove the 2 screws and damper servo.
87106V
6.REMOVE NO. 2 AIR MIX DAMPER SERVO SUB-ASSEMBLY
Disconnect the connector.
Remove the 2 screws and damper servo.
88710C
7.REMOVE AIR CONDITIONER ACCESSORY ASSEMBLY
Remove the packing.
Remove the bolt and 4 screws.
Using pliers, grip the claws of the clips and slide the 2 clips.
Remove the air conditioner accessory assembly.
Remove the 2 O-rings from the air conditioner accessory assembly.
88515B
8.REMOVE REAR COOLING UNIT EXPANSION VALVE
Disconnect the connector.
Detach the clamp.
Using a 4 mm hexagon wrench, remove the 2 hexagon bolts and expansion valve.
87107B
9.REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY
Remove the screw and detach the claw.
Remove the heater clamp.
Remove the heater radiator.
87103D
10.REMOVE REAR BLOWER MOTOR
Disconnect the connector.
Remove the 3 screws and blower motor.
87165C
11.REMOVE BLOWER MOTOR CONTROLLER
Disconnect the connector.
Remove the 2 screws and blower motor controller.
88501R
12.REMOVE EVAPORATOR SUB-ASSEMBLY
Remove the 12 screws and rear cooling unit case LH.
Remove the evaporator.
Remove the 2 O-rings from the evaporator.
82210K
13.REMOVE REAR EVAPORATOR TEMPERATURE SENSOR
Detach the 2 claws and remove the sensor.
88605S
14.REMOVE WIRING AIR CONDITIONING HARNESS SUB-ASSEMBLY