Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMPRESSOR(for 1GR-FE)
RM2660E _58 Vehicle Interior _052847 HEATING / AIR CONDITIONING _0255681 COMPRESSOR(for 1GR-FE) G

HEATING / AIR CONDITIONING  COMPRESSOR(for 1GR-FE)  INSPECTION  


PROCEDURE

Hide 88410 1.INSPECT MAGNET CLUTCH ASSEMBLY

E168157E06
1.104,3.094 0.833,3.49 false 0.833,3.5 0.833,3.813 false 1.344,2.177 1.542,1 false 1.542,1 1.667,1 false 0.094,0.063 2.615,0.521 2.521,0.458 10 false Component without harness connected: (Magnet Clutch) 1.698,0.917 3.052,1.375 1.354,0.458 10 false Magnet Clutch Rotor 0.25,3.823 1.479,4.156 1.229,0.333 10 false Magnet Clutch Hub 2.729,3.969 3.25,4.177 0.521,0.208 10 false Battery

a.

Check the magnet clutch operation.

i.

Confirm that the magnet clutch hub and magnet clutch rotor lock when the battery positive lead is connected to terminal 3 of the magnet clutch, and the negative lead is connected to the ground wire.

If the operation is not as specified, replace the magnet clutch assembly.



b.

Measure the resistance.


c.

Measure the resistance between terminals 1 and 2.

Standard resistance:

65 to 125 Ω at 20°C (68°F)

If the resistance is not as specified, replace the cooler compressor assembly.