Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMPRESSOR(for 1GR-FE)
RM2660E _58 Vehicle Interior _052847 HEATING / AIR CONDITIONING _0255681 COMPRESSOR(for 1GR-FE) A

HEATING / AIR CONDITIONING  COMPRESSOR(for 1GR-FE)  DISASSEMBLY  


PROCEDURE

Hide 1.REMOVE COOLER BRACKET

E168155

a.

Detach the clamp.


b.

Remove the screw and the cooler bracket.


Hide 88410 2.REMOVE MAGNET CLUTCH ASSEMBLY

E168156E01
0.282,1.457 0.865,1.706 0.583,0.250 10 SST 0.646,1.551 1.475,1.551 false

a.

Clamp the cooler compressor in a vise.


b.

Using SST, hold the magnet clutch hub.

SST
09985-00270  


c.

Remove the bolt, magnet clutch hub and magnet clutch washer(s).

HINT:

There is no set number of magnet clutch washers since they are used for adjusting.



d.
I104018

Using a snap ring expander, remove the snap ring and the magnet clutch rotor.

NOTICE:

Do not damage the seal cover of the bearing when removing the snap ring.



e.

Disconnect the connector.


f.
I104019

Using a snap ring expander, remove the snap ring and magnet clutch stator.