Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMPRESSOR(for 1VD-FTV)
RM2660E _58 Vehicle Interior _052847 HEATING / AIR CONDITIONING _0255682 COMPRESSOR(for 1VD-FTV) A

HEATING / AIR CONDITIONING  COMPRESSOR(for 1VD-FTV)  DISASSEMBLY  


PROCEDURE

Hide 1.REMOVE COOLER BRACKET

E168148

a.

Detach the clamp.


b.

Remove the screw and the cooler bracket.


Hide 88410 2.REMOVE MAGNET CLUTCH ASSEMBLY

SST
09985-00260  

E168149E01
0.439,0.185 0.840,0.410 0.401,0.225 10 SST 0.799,0.265 1.006,0.265 false 1.006,0.265 1.212,1.056 false

a.

Clamp the cooler compressor in a vise.


b.

Using SST, hold the magnet clutch hub.


c.

Remove the bolt, magnet clutch hub and magnet clutch washer(s).

HINT:

There is no set number of magnet clutch washers since they are used for adjusting.



d.
I104018

Using a snap ring expander, remove the snap ring and the magnet clutch rotor.

NOTICE:

Do not damage the seal cover of the bearing when removing the snap ring.



e.

Disconnect the connector.


f.
I104019

Using a snap ring expander, remove the snap ring and magnet clutch stator.